 |
 |
 |
|
LS Chevy Billet Aluminum Complete S-Drive Serpentine Kit WITHOUT A/C and w/ Plastic Power Steering Reservoir
Eddie Motorsports LS Chevy S-Drive pulley system is the most compact and complete serpentine kit on the market. They are also the easiest to install. Change the appearance & performance of your engine with a single six rib tensioner and serpentine belt to drive all of your accessories. Our drive system’s brackets and pulleys are CNC machined from high quality aluminum. S-Drive pulley system’s also include all of the necessary stainless steel fasteners as well as the highest quality, name-brand components including Edelbrock/ Tuff Stuff water pumps, Powermaster alternators, Gates tensioner and serpentine belts, Sanden style A/C compressors, and Maval power steering pumps. S-Drive kits are available in raw machined or highly polished finish as well as a variety of anodized or Fusioncoat colors. LS Chevy S-Drive Serpentine system is complete for non air conditioning models with: 140 amp Alternator, Aluminum Water pump, and an attached plastic power steering reservoir.
NOTE: This kit is for models with P/S, but without A/C.
NOTE: LS kits will NOT work on late model LS engines equipped with Variable Valve Timing (VVT)
*Specify Finish, Steering Type and Cooling Fan Type when ordering
Available Finishes:
M= Raw machined- just like it comes off of the machine. May see machine lines and/or some imperfections. Base Price
P= Bright Polished- mirror like shiney finish(ADD $100)
CL= Bright Protective Clear Fusioncoat- looks like polished finish but protected. (ADD $180)
CA= Clear Anodize- as opposed to clear Fusioncoat, will have a matte silver sheen finish. (ADD $180)
BA= Gloss Black Anodize (ADD $180)
BK= Gloss Black Fusioncoat- finish looks almost exactly the same is black anodized. (ADD $180)
MB= Matte Black Fusioncoat- Satin black, our most popular black. (ADD $180)
Great looking kit for any Camaro, Nova, Chevelle or anything with a LS Chevy engine!
PART NUMBER: ENC-1318
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Made in the USA
- Stainless Steel Hardware Included Power Master 140 Amp Alternator
- Gates Tensioner
- Gates 6 Rib Serpentine Belt
- Edelbrock/ Tuff Stuff Water Pumps
- Maval Power Steering Pump with Plastic Reservoir
- Most Compact and Complete Serpentine Kit on the Market
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
New TSP GM 2003 - 13 LS, LSX, High Performance Coil
|
|
GM LS, LSX, Oil Pan Gasket, Neoprene With Steel Core
|
|
NEW TSP GM LS3 / L92 EFI Fabricated Aluminum Intake Manifold for LS3, L76, L92 or L99
|
|
New TSP GM LS, LSX, Fabricated Aluminum Valve Cover, Center Bolt, With Coil Mounts
|
|
|
|
|
|
|
|
|
|
|
|
|
LS1 LS2 LS3 LS6 Engine 102MM 4 Bolt Clear or Black Billet Aluminum LSX Throttle Body
|
|
1967 - 1981 Camaro Billet Aluminum Hood Latch Assembly, Raw Machined Finish
|
|
NEW TSP GM LS1 / LS2 / LS6 Fuel Rail with Middle Crossover Pipe
|
|
Accelerator Throttle Cable, 24" Black, Universal
|
|
|
|
|
|
|
|
|
|
|
|
|
1970 - 1981 Camaro Custom Billet Aluminum Trunk Lid Hinges w/ Polished Finish, Pair
|
|
1967 - 1969 Radiator, Aluminum, Small Block, 3 Row, 21 Inch
|
|
Braided Stainless Steel 24" Accelerator Throttle Cable, Universal
|
|
How to Build and Modify GM LS Series Engines Book by Joseph Potak
|
|
|
|
|
|
|
|
|
|
|
|
|
4-Bolt LSX Throttle Cable Bracket and Gasket with 105mm Opening
|
|
Accelerator Throttle Cable, 36" Stainless Steel Braided, Universal
|
|
New TSP GM LS, LSX, Billet Aluminum Coil Brackets
|
|
New TSP GM LS, LSX, High Torque Starter, Hitachi Style, 3HP
|
|
|
|
|
|
|
|
|
|
|
|
|
1970 - 1981 Camaro POLISHED Billet Aluminum Hood Hinges
|
|
1967 - 1969 Camaro POLISHED Billet Aluminum Hood Hinges
|
|
|
|
|
|
|
|
|
|
|
|
|