1967 - 1969 Camaro QA1 Coil Over Front Shocks Set, Double Adjustable Shocks with Springs

QA1 Double Adjustable Pro-Coil kits are an excellent choice for any 67, 68, or 69 Camaro owner looking for a better stance, ride quality and performance. These easy-to-install bolt-in kits are a great solution for adjustable ride height, and the double adjustable valving provides ample range of tunability from the street to the track. Achieve the ultimate balance of ride quality and performance handling with independent tuning of rebound and compression valving.

Kit includes:

• (2) QA1 Double Adjustable High Performance Shocks
• (2) Specially Designed Springs
• Mounting Hardware

DIAL IN THE PERFECT STANCE
Achieving the perfect, level stance is critical for the overall look and appearance of your car. Pro-Coil kits offer 0 to –2 inches of ride height adjustability, allowing you to dial in the perfect stance for your Camaro. Adjustments within this range can be made with a simple turn of the spring seat nut. For an additional drop beyond 2 inches, consider adding drop spindles to your car.

TUNE YOUR RIDE COMFORT & PERFORMANCE

Double-adjustable coilovers are ideal for drivers looking for great performance on the street or track. Independent tuning of compression and rebound allows you to fine-tune the handling or straight-line performance of your vehicle for any driving condition. Accessing the 18-position knob is easy, and by turning the steering wheel to full lock, you can reach in and make your tuning adjustments at the base of the shock. QA1 Pro-Coil kits feature high-travel, USA-made coil springs built to deliver optimal performance. Spring rates are tailored to your vehicle's weight and driving style.

EASY, BOLT-IN INSTALLATION
GM Pro-Coil Kits seamlessly bolt-in with both Original Equipment (OE) stamped steel control arms or QA1 tubular control arms. This gives you the flexibility to use the kit with your existing setup or upgrade your control arms for additional performance gains.

See Part# SUS-229, (Sold Separately) for a thrust bearing and wrench kit. The thrust bearings install under the springs for easier ride height adjustments!

To view a SPRING RATE REFERENCE CHART, please click on the EXTENDED INFORMATION tab.

PART NUMBER: SUS-1116A

• Coil-Over Shock Type Double-adjustable
• Suspension Height Adjustment 0.0-3.0 in. lowered
• Shock Body Material Aluminum
• Shock Body Finish Clear anodized
• Adjustable Valving Yes
• Number of Valving Selections 324
• Extended Length (in) 14.000 in.
• Collapsed Length (in) 10.130 in.
• Upper Mount Stud
• Lower Mount Tie bar
• Internal Design Twin-tube
• Gas Charged No
• Body Diameter (in) 2.000 in.
• Bushing Material Polyurethane
• Bushing Color Black
• Coil-Over Springs Included No
• Recommended Spring Diameter (in) 2.500 in.
• Recommended Spring Length (in) 10 in.
• Adjustable Mounting Bracket Included No
• Hardware Included Yes

Typically, a spring rate between 350 – 450 is used for small blocks and a spring rate between 450 – 550 is used for big blocks, but your particular circumstance may vary depending on factors such as aluminum versus cast iron componentry (heads, intakes, etc.), adding heavier engine components such as blowers, etc..  The chart below is meant as a reference guide only.  Your needs may vary.

QA1 FRONT SPRINGS RATE REFERENCE CHART

SPRING RATE..................TOTAL WEIGHT ON FRONT WHEELS
350.....................................1200 - 1500 lbs.
450.....................................1600 - 2000 lbs.
550.....................................2000 - 2400 lbs.