1970 - 1981 Camaro QA1 Coil Over Front Shocks Set, Single Adjustable Shocks with Springs

For your 2nd Gen 70 - 81 Camaro model, QA1 offers its Pro Coil System with single adjustable shocks for the daily driver. Compression and rebound adjustment is made easy with one easy-to-reach knob for simultaneous adjustment. With 18 valving options, you’re able to fine tune your suspension for the ride you’re looking for. QA1 Pro-Coil kits feature high-travel, USA-made coil springs built to deliver optimal performance.

Kit includes:

• (2) QA1 High Performance Shocks
• (2) Specially Designed Springs
• Mounting Hardware

DIAL IN THE PERFECT STANCE
Achieving the perfect, level stance is critical for the overall look and appearance of your car. Pro-Coil kits offer 0 to –2 inches of ride height adjustability, allowing you to dial in the perfect stance for your second gen Camaro. Adjustments within this range can be made with a simple turn of the spring seat nut. For an additional drop beyond 2 inches, consider adding drop spindles to your car.

TUNE YOUR RIDE COMFORT & PERFORMANCE
QA1 single adjustable coilovers deliver exceptional ride quality and performance for your vehicle. With the simple turn of a dial, you can effortlessly switch between a comfortable cruise and a more aggressive feel, making them ideal for daily driving or twisty backroads. Accessing the 18-position knob is easy, and by turning the steering wheel to full lock, you can reach in and make your tuning adjustments at the base of the shock.

EASY, BOLT-IN INSTALLATION
GM Pro-Coil Kits seamlessly bolt-in with both Original Equipment (OE) stamped steel control arms or QA1 tubular control arms. This gives you the flexibility to use the kit with your existing setup or upgrade your control arms for additional performance gains.

See Part# SUS-229, (Sold Separately) for a thrust bearing and wrench kit. The thrust bearings install under the springs for easier ride height adjustments!

To view a SPRING RATE REFERENCE CHART, please click on the EXTENDED INFORMATION tab.

PART NUMBER: SUS-1117B

• Coil-Over Shock Type Single-adjustable
• Suspension Height Adjustment 0.0-3.0 in. lowered
• Shock Body Material Aluminum
• Shock Body Finish Clear anodized
• Adjustable Valving Yes
• Number of Valving Selections 18
• Extended Length (in) 17.000 in.
• Collapsed Length (in) 11.630 in.
• Upper Mount Stud
• Lower Mount Tie bar
• Internal Design Twin-tube
• Gas Charged No
• Body Diameter (in) 2.000 in.
• Bushing Material Polyurethane
• Bushing Color Black

Typically, a spring rate between 350 – 450 is used for small blocks and a spring rate between 450 – 550 is used for big blocks, but your particular circumstance may vary depending on factors such as aluminum versus cast iron componentry (heads, intakes, etc.), adding heavier engine components such as blowers, etc..  The chart below is meant as a reference guide only.  Your needs may vary.

QA1 FRONT SPRINGS RATE REFERENCE CHART

SPRING RATE..................TOTAL WEIGHT ON FRONT WHEELS
350.....................................1200 - 1500 lbs.
450.....................................1600 - 2000 lbs.
550.....................................2000 - 2400 lbs.