 |
 |
 |
|
1982 - 1992 Camaro COLD-CASE LS Swap Aluminum Radiator
This LS Swap Third Gen 1982 - 1992 Chevy Camaro COLD-CASE radiator is Tig welded, 100% aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models with 1.25" tubes, better flow and higher cooling rate. This radiator is original appearing and has the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE. For Manual or Automatic transmission Cars. Meant to be used with an external trans cooler.
Want a KIT with Electric Fan and Custom Fit Aluminum Fan Shroud? SEE PART # RAD-414K
THIS RADIATOR IS ONLY FOR MODELS THAT HAVE AN LS ENGINE
Camaro Central highly recommends this for anyone looking for a high quality direct fit LS Conversion 82-92 Camaro Radiator. We have used this in our own builds and have been more than satisfied... Camaro Central Approved!
Features:
Dual Flow Design
Polished Tanks
Petcock Included
and more!
Fits all 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, and 81 MT or AT models with a LS Swap
PART NUMBER RAD-414
A GREEN 50/50 Coolant mix is recommended. ORANGE or YELLOW based coolant are known to eat away at the aluminum much quicker and will void the warranty.
- Core Height 16.85 Inch
- Core Width 26.25 Inch
- Overall Height 18.5 Inch
- Overall Width 32 Inch
- Overall Thickness 3 Inch
- Upper Hose 1.25 Inch
- Lower Hose 1.5 Inch
- Tubes (2) 1.25 Inch Tubes
- Included Steam Port
Why Cold Case?
Here at Cold Case, our goal is to produce the highest quality aluminum radiator, make every model be a direct fit, look original, all while maintaining a reasonable price point. Our extensive research and development team ensures that you are getting a drop in radiator with every purchase. We don't cut corners or cross over year ranges if the dimensions are close. If we list it, it's a direct fit with no modifications to be made. All Cold Case Radiators Feature: - Lifetime Warranty
- 60 Day COOL Guarantee
- Correct OEM Fitment
- 100% Expert TIG Welded
- 2 Oversized Cooling Rows
- (2x) 1" to 1 1/4" Tubes Per Row
- OEM Stamped Tanks
Cold Case radiators vs. the competition. Cold Case welds are on the inside of the tank instead of the outside. Also note the ability to install an original looking radiator cap on Cold Case Models
Our Cold-Case radiators are 42.7 % lighter than a comparable copper radiator but have 30% more material thickness than the cheaply made no-name radiators.
Fluids enter the radiator by water pump pressure, but also pass through the radiator by gravity. Therefore, in most situations, there are always hot and cold spots in traditional radiators.
Cold Case Dual or Tri Flow* designed radiators more evenly distributes the fluid eliminating hot and cold spots. Look for the Dual or Tri-Flow symbols on your favorite radiator.
(Top/bottom tank radiators physically can't utilize dual flow and must have offset inlet and outlets to make tri-flow possible. Therefore the availability of Tri-Flow in Top/Bottom tank radiators is limited.)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 100 percent TIG welded
- All Aluminum
- Polished OE style tanks
- (2) 1.25 Inch Rows
- 16 fins per inch
- Corrugated fins that give more surface area and more thermal transfer
- Pressure tested
- For automatic/standard trans
- LS Swap double pass
- Direct fitment for 1982 - 1992 Camaro Models with a LS Conversion / Swap
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
|
|
|
