67 - 69 MASS BACKING Style Floor Carpet
Made in the U.S.A.

If you want the best carpet available for your 1st generation Camaro with an Manual or Automatic Transmission, here it is. This Molded Carpet Set set is for all 1967, 67, 1968, 68, 1969 and 69 Camaro Models with Automatic or Manual Transmission. This new designed carpet is the best of both worlds. Features the correct more full 80/20 loop with a ACC Heavy Mass Backing pre-installed. Looks crisp and extra defined once installed. With the Heavy Mass Backing its gives you a much more quiet inside and is easier to install. Exact factory style rubber heel pad, and dimmer switch grommet included. Strongly recommended for anyone that wants the best for their ride. Don't forget to pick your desired color choice.

*Includes Pre-Installed Jute Padding Like Original!


Mass Backing Features:
*Great sound and heat barrier.

*Increases the overall look of the carpet after installation.
*Approximately 45 mil thick EVA material.

The Best Carpet Available for your 67-69 Camaro on the Market!

PART NUMBER : INT-1150

• Moss Green (14) = 1969 with Light Green interior
  Dark Olive Green (30) = 1969 with Dark Green interior
  Dark Blue = 1969 only
  Medium Blue = 1967 with Standard Interior and ALL 1968
  Ivy Gold = 1968 only
  Gold = 1967 only
  Bright Blue = 1967 with Deluxe Interior

READ FULL INSTRUCTIONS BEFORE BEGINNING *Instructions may vary for multi-piece sets
1. Remove new product from box. Lay flat and pop contours back into place. Allow a few hours for product to relax back into proper shape. Check material for accuracy.
2. Compare new and old carpet. (New product may have excess material on outer edges.)
3. In some applications it may be necessary to use old carpet as a template for console cuts.
4. IMPORTANT: Fold new product in half from front to rear. Place in vehicle lining up molded contour to seat risers or any other identifiable starting point on both driver and passenger sides. Once fitted, continue installation.
5. Roll product forward making any cuts needed for brackets, shifters and heater vents etc. while maintaining proper alignment on seat risers or other starting point.
6. Next, check fit at firewall. May need to cut in center to allow product to go underneath dash on certain models.
7. Continue same procedure for remainder of installation – working your way to outer edges.
8. Once product is properly fitted you are now ready to do the final trimmings on outer edges, seat belts and holes etc.
*Applying adhesive to hold product in place is generally not necessary. If desired, only apply a light brush or spray adhesive after correct dry fit has been obtained.

ACC guarantees all of our products to be free from defects in material and workmanship for a period of one year. (Normal wear from use excluded from this guarantee.) ACC will issue a replacement or credit for any defective carpet sets, except those damaged in shipping.

Please contact our Customer Service Dept. and we will work with ACC to promptly handle your case.

*NOTE: PLEASE INSPECT EACH CARPET SET PRIOR TO INSTALLATION. CARPET SETS CANNOT BE RETURNED AFTER BEING CUT, TRIMMED, GLUED, OR ALTERED IN ANY MANNER.