 |
 |
 |
|
1967 - 1968 Camaro Muncie 4 Speed Transmission, M-22 Rockcrusher
Complete original GM Muncie transmission rebuilt and guaranteed for 1 year. Correct fit for all 1967 - 1968 model Camaros. This one will have the studs coming out from the side where your shifter linkage mounts, like pictured. This is the Muncie M-22 Rockcrusher four speed. Designed for the highest performance models. Bulletproof strength with more flat cut gear teeth. Makes a beautiful, distinct whine noise while driving. If you want the Mack Daddy, here it is!
*Please double check your clutch and pressure plate set to match below
67-68 M-22 ~ Input Shaft = 0 Grooves with Coarse 10 Spline Count
2.20 First Gear
27 Spline Tail Shaft
***Note: This Transmission is shipped factory direct. Please allow 4-8 weeks for delivery. Shipping charges will apply for all in-store pickups and show deliveries.
PART NUMBER: TRA-615
- The Muncie M20 is basically a wide-ratio transmission and was intended for normal street driving use. The M20 units have a 2.52:1 first gear. The M20 is most compatible with GM 3 Series rear end differential gear ratios such as 3.08, 3.31, 3.55, 3.73, etc. They are for economy and street drivability and just cruising.
The Muncie M21 is a close-ratio unit, ideally designed to be matched with lower gear ratios such as 3.73, 4.11, or 4.56 GM 4 Series rear end differential gears. The M21 units have a 2.20:1 first gear. A close-ratio gearbox keeps shift points closer together, which keeps rpms up. The M22 has higher-nickel-content straight-cut gears. It uses much the same gear ratios as the close-ratio M-21, but can take more abuse. An M22 retains less heat due to its straight-cut gears and the lack of thrust that helical-cut gears create. An M-22 holds up really well, the downside is it tends to make noise. It will rattle at low rpms and whine at high rpms.
The Muncie M22 is also a close-ratio unit, ideally designed to be matched with lower gear ratios such as 3.73, 4.11, or 4.56 GM 4 Series rear end differential gears. The M22 units have a 2.20:1 first gear. The M22 is the one and only "Rock Crusher". Some people think all Muncie four-speeds are Rock Crushers, but they're not.
*PLEASE NOTE ~ THIS TRANSMISSION IS SHIPPED DRY. ALWAYS USE REGULAR 80 / 90 GEAR OIL SIMILAR TO OUR DRIVEN PART # 04530.
|
|
|
 |
|
 |
| Other Great Parts That You Might Need |
|
1967 - 1968 Camaro Manual Console Floor Shift Boot, 3-Speed or 4-Speed
|
|
1967 - 1968 Camaro Shifter Knob Ball, Black and Chrome, 5/16 Inch Muncie 4-Speed, 2 Pieces
|
|
1967 - 1968 Camaro 4 Speed Chrome Shifter Knob Ball, 5/16 Inch OE Style
|
|
1967 - 1969 Camaro Transmission Crossmember for TH-350, Muncie 4-SPD (Small Block) and Powerglide
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Camaro Shifter Knob Ball, White 4 Speed, 5/16 Inch Thread
|
|
1967 - 1968 Camaro Hurst Four Speed Shifter Assembly, Competition Plus
|
|
GO 80W-90 Conventional GL-4 Driven Racing Gear Oil, 1 Quart, 32 Ounces
|
|
1967 - 1968 Camaro 4-Speed Shifter Assembly for Muncie Transmission, 9789336
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Camaro HURST Shifter Linkage Install Kit, for Muncie Transmission
|
|
New Chevy 3899621 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 11"
|
|
|
|
|
|
|
|
|
|
|
|
|