 |
 |
 |
 |
DISCONTINUED, USE POW-401 for a Brand New Gear Box
1967 - 1976 Camaro Power Steering Gear Box, GM Updated Design, 10:1 Fast Ratio 2.75 Turn
Newly Remanufactured / Upgraded Fast Ratio 10:1, 2.75 Turn Original Saginaw Power Steering Gearbox for your Classic Car. These gear boxes are made to fit your classic car with updated technology. The old sloppy loose internal gear and valving have been replaced with newer firm responsive style internals.
- Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look.
- UPDATED INTERNALS FOR NEW CAR FEEL
- Each component is carefully inspected and replaced if not to OE tolerances.
- All seals and O-rings are replaced with OE equivalent parts.
- Each unit is tested to insure OE performance.
- Painted with a high quality paint.
- All units are carefully packaged to insure safe arrival at your door.
- Remanufactured in the USA and backed with a Limited Lifetime Warranty (commercial use- one year).
- NO CORE CHARGE
Original style inverted flare fittings are installed for use with original style hoses. A new Rag Joint Coupler is also included to get the job done right the first time. This gear box will give you exceptional road feel and much faster response to the steering wheel. This gearbox is perfect for anything: street, road cours, road race for tight turn applications. Say goodbye to that old loose feeling gear box and order your new upgraded gearbox today!
Fits: 1967 - 1976 Camaro Models
1967 - 1976 Firebird Models
1968 - 1972 Nova Models
1964 - 1976 GTO, LeMans, and Tempest Models
1964 - 1976 Chevelle, El Camino, and Impala Models... and more!!
Part Number: POW-400
- ¾-30 spline input shaft and has a 32 and 4 output
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Late Model Style Firm Feel
- 2.75 Turns Lock to Lock
- 10:1 Quick Ratio
- Rag Joint Included
- Uses Factory Style Hoses
- No Core Charge
|
|
 |
 |
 |
 |

Other Great Parts That You Might Need |
1967 - 1969 Camaro Power Steering Pitman Arm, 5-7/8 Inch Fast Ratio, Greasable
|
|
1973 - 1975 Camaro Power Steering Pressure and Return Hoses Set
|
|
1967 - 1981 Camaro Power Steering Gear Box Fitting Converts to 6 AN Fitting , 11/16 Inch -18
|
|
1967 - 1976 Camaro Brand New Standard Ratio Power Steering Gear Box, 3.5 Turn
|
|
|
|
|
|
|
|
|
|
1969 Camaro Power Steering Pressure and Return Hoses Set
|
|
1967 - 1976 Camaro Brand New Quick Ratio Power Steering Gear Box, 2.5 Turn
|
|
1967 - 1981 Camaro Power Steering Gear Box Fitting Converts to 6 AN Fitting , 5/8 Inch -18
|
|
1967 - 1969 Camaro Power Steering Hose Clip, Each
|
|
|
|
|
|
|
|
|
|
1967 - 1976 Camaro Power Steering Rag Joint Coupler, 3-1/4" OD, For 13/16" 36 Full Spline or 31 Spline with Flat Spot Input Shafts
|
|
1970 - 1972 Camaro Power Steering Pressure and Return Hose Set
|
|
1967 - 1976 Power Steering Rag Joint Coupler, USA
|
|
1967 - 1969 Camaro Power Steering Pressure Hose Support Bracket at Gear Box Bracket
|
|
|
|
|
|
|
|
|
|
1970 - 1974 Camaro Power Steering Pump, New with Reservoir and Cap
|
|
1967 - 1968 Camaro Power Steering Pressure Hose Line
|
|
|
|
|
|
|
|
|
|
|

|