You are here: Home > Transmission & Clutch Components > Automatic Transmission Components > Automatic Linkage Kits and Components
Sort By:
Page of 2
1967 - 1969 Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel - Used GM - 3895290
1967 - 1969 Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel - Used GM - 3895290
Our Price: $65.00

Correct automatic transmission interlock lockout bell crank swivel for your camaro.  Exact fit for all 1967 - 1969 models with a powerglide automatic transmission.  Mounts on the side of your sub frame and allows the reverse lock out to work properly.  Currently available as a used GM item only.  Original GM part number 3895290 .

PART NUMBER: TRA-58C
1967-1969 Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel - Used GM - 3912619
1967 - 1969 Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel - Used GM - 3912619
Our Price: $75.00

Correct automatic transmission interlock lockout bell crank swivel for your camaro.  Exact fit for all 1967 - 1969 models with a turbo 350 or turbo 400 automatic transmission.  Mounts on the side of your sub frame and allows the reverse lock out to work properly.  Commonly stamped ( N - 2619 ) .  Currently available as a used GM item only.  Original GM part numbers 3912619 and 20329439 .

PART NUMBER: TRA-58
1969 Automatic Lower Lockout Rod TH-400
1967 - 1969 Automatic Transmission Lower Lockout Rod - 7 Inch
Our Price: $23.95

New lower lock out rod for your camaro.  This is the lower or smaller rod that goes from your frame swivel back to the transmission.  We have found some discrepancies as far as the applications and models of transmissions this rod will work for.  You may want to measure your distance just to be certain.  Right at seven inches in length.  This is part of the lock out system which allows your car to correctly only start while in park.
Fits;
*All 67 - 68 with automatic trans, column shift
*All 69 with automatic trans, column shift or floor shift

PART NUMBER: TRA-56
1967 - 1969 Automatic Transmission Lower Lockout Rod - 8 Inch
Our Price: $23.95

New lower lock out rod for your camaro.  This is the lower or smaller rod that goes from your frame swivel back to the transmission.  We have found some discrepancies as far as the applications and models of transmissions this rod will work for.  You may want to measure your distance just to be certain.  Right at eight inches in length.  This is part of the lock out system which allows your car to correctly only start while in park.
Fits;
*All 67 - 68 with automatic trans, column shift
*All 69 with automatic trans, column shift or floor shift

PART NUMBER: TRA-57
1967 - 1972 Camaro Kickdown Linkage for Powerglide Transmission Models
1967 - 1972 Camaro Kickdown Linkage for Powerglide Transmission Models
Our Price: $29.95

Correct upper kick down rod for all two barrel carburetor models.  Exact fit for all PG transmission equipped cars.  Premium quality.

PART NUMBER: TRA-59
1967 - 1972 Camaro Powerglide Upper Kickdown Linkage 4bbl
1967 - 1972 Camaro Powerglide Upper Kickdown Linkage 4bbl
Our Price: $29.95

For four barrel carburetor upper.  Power Glide Transmission Cars.

PART NUMBER: TRA-60
1967-1972 Center Kickdown Linkage For Power Glide
1967 - 1972 Center Kickdown Swivel Linkage For Power Glide
Our Price: $79.95

Correct center kick down swivel linkage bracket. Mounts on the side of your bellhousing. Exact fit for all power glide transmission equipped cars.

PART NUMBER: TRA-62
1967 - 1972 Kickdown Upper Rod Clip, Power Glide
Our Price: $2.99

Attaches upper rod kickdown rod to bell crank on side of bellhousing.  For powerglide transmission cars. Fit 2bbl & 4 bbl carburetors


PART NUMBER: TRA-116
1967 - 1978 Chevy Camaro TH-400 Turbo 400 Transmission Trans Wiring Harness White Plastic Clip
Our Price: $15.95

New GM Turbo 400 Transmission Wiring plastic clip no available.  1967 - 78 GM Turbo 400 Transmission Wiring Plastic Clip with part#'s " P-4404 6 7/7 ".  Located on the side of the trans to hold the harness.  This clip is often missing from your Camaro and now you can replace it with a new one.  This is a high quality exact reproduction made from the GM factory tooling.  It is identical to the original and features the part number P-4404 .

Part Number: TRA-25C
1967 - 1981 Universal Auto Shifter Cable Install Kit
1967 - 1981 Universal Auto Shifter Cable Install Kit
Our Price: $44.95

New complete set includes; Side tranny bracket, bottom trans pan bracket, u-clips, cable stud, and hardware kit.  Everything you need to mount your shifter cable at the transmission and at the shifter.  Works great for all automatic turbo 350 or turbo 400 transmissions.  

PART NUMBER # TRA-35
1967 Adjustable Shifter Linkage Rod Automatic Transmissons
Our Price: $29.95

New adjustable shifter linkage for most any 1967 automatic transmissions.  Adjust from 12.5 inches to 16.5 inches.  Swivel ball joints on each end making this an easy-to-install custom linkage.  Goes from the bottom of your shifter assembly back to the side of the transmission.  The most smooth shifter linkage kit on the market at a great price!

PART NUMBER: TRA-627
1967 Auto Shifter Conversion Kit for Overdrive Transmissions
Our Price: $64.95

New conversion kit for upgrading your turbo 350 or turbo 400 shifter to adapt to a newer overdrive transmission.  Use your factory-installed automatic floor shifter with a newer 4-speed overdrive (TH700-R4 , TH200-4R or 4L60) transmission.  This kit uses your original linkage.  The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, all necessary hardware, and instructions.  

PART NUMBER: TRA-31
1967 Auto Shifter Conversion Kit From PG to Turbo
Our Price: $59.95

New conversion kit for upgrading your powerglide shifter to a turbo 350 or turbo 400 transmission.  Use your factory-installed Powerglide automatic floor shifter with a newer 3-speed (TH350 or TH400)  transmission.  This kit uses your original shifter linkage.  The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, all necessary hardware, and instructions.

PART NUMBER: TRA-30
1967 Automatic Linkage for All 3 and 4 speed Transmissions
Our Price: $42.95

This linkage can be used on all 3 or 4 speed automatic transmissons. It is a great addition to our 67 shifter conversion kits (TRA-30 & TRA-31).

PART NUMBER: TRA-32
1967 Automatic Shifter Washer Set
Our Price: $6.95

Correct pair with one wave and one regular washer.  Without these your shifter will be loose or sloppy.

PART NUMBER: TRA-929
1967 Camaro Auto Shift Linkage PG to TH-400 / TH-350 Conversion Kit
Our Price: $52.95

Convert your 1967 Powerglide Shifter over to a new TH-400 and TH-350 transmission with this kit.  This Linkage kit is for use when replacing a Powerglide transmission to a TH-350 or TH-400.  Can be used with both column conversion or floor shift conversions.  Use with Part# TRA-30 for a complete change over.  Order yours today.
 
Fits: 67 Camaro and Firebird
 
PART NUMBER: TRA-17B
1967 Camaro Auto Shift Linkage TH-350 and TH-400 Kit
Our Price: $54.95

1967 Automatic TH-400 and TH-350 rod w/lever and swivel.  This Linkage kit is for use with original 1967 3 speed automatic shifters.

PART NUMBER: TRA-17
1967 Camaro Floorshift Powerglide Shifter Linkage with Swivel ( PG )
Our Price: $44.95

67 Powerglide shift linkage rod and swivel.  This is for all 67 Camaros with a floor mounted shifter and a powerglide transmission.

PART NUMBER: TRA-16
1967 Camaro Powerglide Auto Shifter Linkage Column to Floor Conversion
Our Price: $52.95

New shifter rod for your 67 Camaro. Convert your 1967 2 Speed powerglide column shifter to a floor shifter with this handy kit. Made in the USA.

**Converts your column shifter to a floor mounted shifter.

PART NUMBER: TRA-32A
1967 Powerglide Transmission Side Gear Selector Lever
1967 Powerglide Transmission Side Gear Selector Lever
Our Price: $39.95

New powerglide transmission selector lever for your camaro.  Exact fit for all powerglide transmissions.  Stamped steel construction like originals.  Includes rubber bushing and insert.

PART NUMBER: TRA-18
1967 Shift Linkage Swivel Kit
Our Price: $13.95

Year(s): 67

PART NUMBER: TRA-33
1967-1972 Lower Kickdown Linkage Rod for Power Glide Transmission
Our Price: $39.95

New correct design lower kick down rod for your camaro.  Exact fit for all models with a powerglide transmission.  Correct swivel design on both ends.

PART NUMBER: TRA-61
1968 - 1969 Automatic Shifter Overdrive Conversion Kit
Our Price: $99.95

New conversion kit for upgrading your turbo 350 or turbo 400 shifter to adapt to a newer overdrive transmission.  Use your factory-installed automatic floor shifter with a newer 4-speed overdrive (TH700-R4 , TH200-4R or 4L60) transmission.  This kit uses your original shifter cable.  The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, console indicator OD lens, all necessary hardware, and instructions.  

PART NUMBER: TRA-36
1968 - 1969 Automatic Shifter Overdrive Conversion Kit, 4L80E
Our Price: $99.95

New conversion kit for upgrading your turbo 350 or turbo 400 shifter to adapt to a newer overdrive transmission. Use your factory-installed automatic floor shifter with a newer 4-speed overdrive 4L80E transmission. This kit uses your original shifter cable. The 4L80E of range select shafts. A long shaft used in trucks for the factory neutral safety switch and shorter shafts, some like the TH400 and some clocked differently. As a result the conversion kit includes three different range select shafts, a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, console indicator OD lens, all necessary hardware, and instructions.

PART NUMBER: TRA-360
1968 - 1969 Automatic Shifter Overdrive Conversion Kit, 6L80E
Our Price: $99.95

New conversion kit for upgrading your turbo 350 or turbo 400 shifter to adapt to a newer overdrive transmission. Use your factory-installed automatic floor shifter with a newer 4-speed overdrive 4L80E transmission. This kit uses your original shifter cable. The 6L80E uses electronic paddle shifters or other means to manually select gears other than park, reverse, neutral and drive. The shifter is placed in Manual mode to shift electronically. The conversion kit includes a new shift detent with a hard stop for (M) manual mode, cable mount, a new matching transmission shift lever, console indicator OD lens, all necessary hardware, and instructions.

PART NUMBER: TRA-361
1968-1969 Console Shift Lens With OD
1968 - 1969 Console Shift Plate Indicator Pattern Lens, Automatic with Overdrive
Our Price: $14.95

New custom shift indicator lens for your 68-69 camaro. Exact fit for all models with an automatic overdrive transmission.

PART NUMBER: CON-72
1968 - 1969 Floor Shift Cable Gear Selector Lever
Our Price: $17.95

Gear selector lever mounts on side of transmission Made in the USA. Used with all floor mounted factory automatic shifters for TH-350 & TH-400. Year(s): 69 68

PART NUMBER: TRA-26
1968 - 1972 Automatic Transmission Shifter Cable With Boot - Premium
Our Price: $99.95

New oe style shifter cable assembly for your camaro.  Exact fit for all automatic models with a floor shifter.  Works great for all; powerglide, turbo 350, turbo 400, and even newer TH700-R4 , TH200-4R or 4L60 overdrive transmissions.  Highest grade quality!

PART NUMBER: TRA-27
1968 - 1972 Camaro Automatic Transmission Shifter Cable With Boot
Our Price: $45.95

OEM quality technically correct reproduction cable assembly for restorers and high performance applications. High quality ensures smooth cable operation and eliminates binding and end separation sometimes experienced in lesser quality generic imports. With original appearance tube crimps, shield (casing), fittings, boot and cable links.  Cable assembly includes an installed technically correct thru-floor rubber grommet with a heavy spring steel spine insert.  Three correct spring steel mounting tabs ensure grommet remains firmly attached to floor, even under the most "active" shifter movements.  Works great for all; powerglide, turbo 350, turbo 400, and even newer TH700-R4 , TH200-4R or 4L60 overdrive transmissions.  

PART NUMBER: TRA-28
1968 - 1972 Floor Shifter Cable Mounting Bracket, Powerglide
Our Price: $24.95

New correct design shifter cable bracket for your camaro.  Exact fit for all 68 - 72 models with a power glide transmission.  This is the bracket that mounts on your transmission pan and allows the shift cable to have the right travel for proper operation.  
PART NUMBER: TRA-23