 |
 |
 |
|
1982 - 1992 Camaro Hedman LS Swap 1 3/4" Mid-Length Headers, Pair
All new 1 3/4" Hedman Headers perfect for your LS swapped 82 - 92 Camaro. These headers are professionally CNC machined and bent to perfection. Since 1954 Hedman has been manufacturing headers, these LS swap headers are a great example of their high quality and precise attention to detail. Made from Cast Raw uncoated Mild Steel these will look great in your third gen.
Each pair of headers are made together and hand welded to ensure they match. To resist the threat of warping each header will have a 3/8" flange. Even if the header collector is not perfectly aligned, the gasket-less ball and socket design allows the exhaust system to bolt right up!
Note: These awesome 1 3/4" Headers are specific to 82 - 92 F-Bodys with an LS motor.
PART NUMBER: ENC-1404
- TUBE DIAMETER 1-3/4 in.
- TUBE STYLE Mid-Length
- COLLECTOR STYLE BALL and SOCKET Style (Gasketless)
- AIR CONDITIONING Yes
- AUTOMATIC TRANSMISSION - COLUMN No
- AUTOMATIC TRANSMISSION - FLOOR Yes
- MANUAL TRANSMISSION - COLUMN No
- MANUAL TRANSMISSION - FLOOR Yes
- COLLECTOR ATTACHMENT 3 in.
- COLLECTOR DIAMETER 3 in.
- COLLECTOR SIZE 3 in.
- REDUCER OUTLET SIZE 3 in.
- EXHAUST SYSTEM DIA 2-1/2 in.
- CONTENTS: One pair of headers, mounting hardware, O2 Bungs, gaskets, Instructions
- E.O. # No
- EMISSIONS NOTES Not Legal For Street Use on '75-Later Model Years! Legal for off-road use only.
- ENGINE Chevy LS Series
- FINISH Uncoated
- FINISH TYPE Uncoated Mild steel
- FLANGE STYLE Standard
- FLANGE THICKNESS 0.375 in.
- PRODUCT TYPE Headers
- HEAD STYLE Factory Profile
- HEADER PORT SHAPE Round
- HEADER STYLE Mid-Length Tube
- NOTES 82 - 92 F-body Chev. LS Swap Headers
- O2 SENSORS INCLUDED No
- PORT STYLE Round
- POWER STEERING Yes
- MATERIAL Mild Steel
- TRANSMISSION COMPATIBILITY Manual Transmission
- TRANSMISSION COMPATIBILITY Automatic Transmission
- TUBE DESIGN Standard
- TUBE LENGTH Mid-Length Tubes
- TUBE MATERIAL THICKNESS 18g
- TUBE SIZE 1-3/4 in.
- WITH A.I.R. SYSTEM No
- WITH EGR No
- WELD-UP No
- TUNED No
- BOLTS/STUDS INCLUDED Yes
- CATALYTIC CONVERTER(S) INCLUDED No
- CROSSOVER PIPE INCLUDED No
- GASKET OR SEAL INCLUDED Yes
- INSTALLATION HARDWARE INCLUDED Yes
- MOTOR MOUNTS INCLUDED No
- REDUCERS INCLUDED Yes
- Y-PIPE INCLUDED No
- QUANTITY Sold as a set.
- PRIMARY TUBE GAUGE 18g
- PRIMARY TUBE DIAMETER (IN) 1.75 in.
- PACKAGE CONTENTS Pair of headers, mounting hardware, O2 Bungs, gaskets, Reducers, Instructions
- HEADER MATERIAL Mild Steel
- HEADER FINISH Raw
- CYLINDER HEAD PORT SHAPE Round
- O2 PROVISION No
- VEHICLE FAMILY F-Body (GM) 1982-92
- HEADER CONSTRUCTION MILD STEEL- Standard-Duty
- REPLACEMENT GASKET 18495
- REPLACEMENT HEAD FLANGE GASKET 18495
- CALIFORNIA PROPOSITION 65 WARNING: Cancer. For more info visit www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- USA Made
- 1 3/4" Cast Steel
- CNC Machined
- Hand Welded
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
Braided Stainless Steel 24" Accelerator Throttle Cable, Universal
|
|
How to Build and Modify GM LS Series Engines Book by Joseph Potak
|
|
New TSP GM 2003 - 13 LS, LSX, High Performance Coil
|
|
NEW TSP GM LS3 / L92 EFI Fabricated Aluminum Intake Manifold for LS3, L76, L92 or L99
|
|
|
|
|
|
|
|
|
|
|
|
|
LS1 LS2 LS3 LS6 Engine 102MM 4 Bolt Clear or Black Billet Aluminum LSX Throttle Body
|
|
1982 - 1992 Camaro LS Conversion Crossmember Mount Kit for 4L60E/ 65E
|
|
New TSP GM LS, LSX, High Torque Starter, Hitachi Style, 3HP
|
|
NEW TSP GM LS1 / LS2 / LS6 Fuel Rail with Middle Crossover Pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
4-Bolt LSX Throttle Cable Bracket and Gasket with 105mm Opening
|
|
New TSP GM LS, LSX, Fabricated Oil Pan, Rear Sump
|
|
GM LS, LSX, Oil Pan Gasket, Neoprene With Steel Core
|
|
|
|
|
|
|
|
|
|
|
|
|