Home > Suspension > QA1 High Quality Performance Suspension Products > 1967 - 1969 Shock (QA1), Front Single Adjustable Stocker Star R-Series, Each
	PART NUMBER: SUS-1111C ***DISCONTINUED***

Description Technical Specs   QA1's Drag "R" Series Stocker Star shock absorbers for 67 - 69 Camaro are designed with drag racing in mind.  With 18 valving options for rebound and a firm compression, you can't go wrong.   Sold each. PART NUMBER: SUS-1111C Internal Design = Twin-tube Adjustable = Yes Gas Charged = No Bushing Material = Polyurethane Bushing Color = Black Boot Included = No Extended Length (in) = 13.500 in. Collapsed Length (in) = 8.750 in. Body Diameter (in) = 2.000 in. Upper Mount = Stud Lower Mount = Tie bar Quantity = Sold individually Notes: Some front applications may require the lower a-arm to be dropped for installation. Body diameter may be too large to allow mounting from the bottom. Some control arm's shock openings may need to be enlarged to accept a QA1 shock. Stud mounts are measured to the shoulder of the stud. Add 13/16" for installed compressed length per stud mount. Loops and t-bars are measured to the center of the loop. Lengths may vary slightly. Due to deviations from the factory ride heights, it may be necessary to check the actual ride height of your particular applications. See our Tech section for information on measuring proper ride height. Features Made in the U.S.A. Easy, Bolt-In Installation Non-Coil-Over Remote Ready 100% Dyno Tested and Serialized Rebuildable and Revalveable by the QA1 Factory or QA1 Authorized Service Centers

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: Suspension > QA1 High Quality Performance Suspension Products Model Years > 1967 Camaro Parts Model Years > 1968 Camaro Parts Model Years > 1969 Camaro Parts Suspension Suspension > Shocks & Components Model Years