You are here: Home > Suspension > Subframes & Mounting Components > Subframe Mounting Components
Sort By:
Page of 2
1967 - 1969 Camaro Firewall to Body Mount Brace LH
1967 - 1969 Firewall Bracket, Firewall Pan to Subframe Mounted, LH
Our Price: $84.95
Sale Price: $79.95

FIREWALL BODY MOUNT BRACE, Left hand firewall brace.  Welds at inner lower firewall pan to subframe.  Includes cage nut.  Premium quality heavy duty steel.

*Fits all 67 68 69 Camaro Models

PART NUMBER: SHE-255L
1967 - 1969 Camaro Firewall to Body Mount Brace RH
1967 - 1969 Firewall Bracket, Firewall Pan to Subframe Mounted, RH
Our Price: $84.95
Sale Price: $79.95

FIREWALL BODY MOUNT BRACE, Right hand firewall brace.  Welds at inner lower firewall pan to subframe.  Includes cage nut.  Premium quality heavy duty steel.

*Fits all 67 68 69 Camaro Models

PART NUMBER: SHE-255R
1967-1969 Radiator Support Bushing Set
1967 - 1969 Radiator Support Bushing Set, Hardware Included
Our Price: $24.95

Radiator support bushing set for 67 - 69 Camaro, includes hardware.

PART NUMBER: SUS-216
1967 - 1969 Subframe Body Mount Bushing Cage Nut with Retainer
Our Price: $29.95

New correct design subframe mounting nut and metal cage retainer set for 67 - 69 Camaro.  This is the nut thats on your body where the body bushing mounts.  Four required per car; two at the firewall and two at the rear of your subframe.  Must be welded in as original.

PART NUMBER: SUS-218
1967 - 1969  Camaro Subframe Body Mount Bushings Set
1967 - 1969 Subframe Body Mount Bushings Set, 12 Pieces
Our Price: $39.95

New correct factory style subframe body mount bushings for your Camaro.  Complete 12 piece kit including all bushings and metal sleeves.  Two for the radiator support, two for the front subframe to front toe board area, and two for the rear subframe to body.

For the hardware set that goes with these, please add either SUS-214 (OE Style) or SUS-215 (Replacement Style).

PART NUMBER: SUS-209
1967 - 1969 Subframe Connectors, Round Tube, Coupe
1967 - 1969 Subframe Connectors, Round Tube, Coupe
Our Price: $319.95

New premium quality front to rear frame connectors for 67 - 69 Camaro. These connectors will greatly stiffen your chassis, help eleminate roll and improve your cars response. The connectors require the use of rear frame interlock body mount bushings that are included.

PART NUMBER: SUS-411
1967 - 1969 Subframe Mounting Point Repair Plates Set, 6 Pieces for All Points
Our Price: $49.95

Subframe mount repair plates for 67 - 69 Camaro.  Repairs all 6 mounting points.

PART NUMBER: SUS-220
1967 - 1969 Upper Front Coil Spring Mount Repair Pocket, Pair
Our Price: $34.95

67 - 69 Upper coil spring mount pocket. This patch will replace the rusted out or worn spring pocket area in your sub frame. Simply remove the worn area and weld this mount in place.

Part Number: SUS-466
1967 - 1973 Steering Coupler Shaft Stud Nuts and Washers
1967 - 1978 Steering Coupler Shaft Stud Nuts and Washers
Our Price: $5.95

New hardware set for your 67 - 78 Camaro. Correct steering coupler / ragjoint stud nuts and washers. Two exact size nuts with lock washers.

Part Number: SUS-95
1967 - 1981 Camaro Billet Aluminum Body Mounts
Our Price: $175.00

New super cool billet aluminum body mounts. This version is for stock height applications.  These billet body mounts fit perfectly between the sub frame and body of the 1967-1969 Camaro and/or the  1968-1974 Nova.  The strength of aluminum body mounts make for a more rigid ride enhancing your carís handling.
Made in the USA!!
*OFFICIALLY LICENSED BY GM RESTORATION PARTS

PART NUMBER: SUS-815
1967 - 1981 DSE 1/2 Height Body Mount Bushings
1967 - 1981 DSE 1/2 Height Body Mount Bushings
Our Price: $129.95

Detroit Speed and Engineering's solid body mount bushings provide a simple approach to eliminating the flex that occurs between the body and subframe connection. This will improve vehicle handling response by increasing chassis stiffness. These mount bushings should be used when installing subframe connectors for maximum torsional rigidity.

PART NUMBER: SUS-526
1967 - 1981 DSE Rear Upper Shock Mounts
Our Price: $22.95

Use our fabricated upper shock mounts when mini-tubbing your car for a larger rear tire. These mounts should be used with our rear upper shock crossmember. They are designed for shocks with an eyelet upper mount using a 1/2" bolt. They are sold in pairs. The 1/2" bolts and nuts are included.

Note: This rear upper shock crossmember is used with the Mini-Tub Kit. This is different from the crossmember used in the QUADRA Link kit.

PART NUMBER: SUS-921
1967 - 1981 Camaro Subframe Body Bushing Mounting Hardware Set
1967 - 1981 Subframe Body Mount Bushing Hardware Set: Bolts, Nuts, and Washers
Our Price: $19.95

New subframe bushing hardware set with replacement style bolts.  Fits all 67 - 81 Camaro models.  

Part Number: SUS-215
1967 - 1981 Camaro Subframe Body Bushing Mounting Hardware and Bolts, Correct OE Style
1967 - 1981 Subframe Body Mount Bushing Hardware Set: Bolts, Nuts, and Washers, OE Style Correct
Our Price: $34.95

New correct OE style body mounting hardware for 67 - 81 Camaro.  Exact black with pointed tip original style bolts, nuts and washers set.  Does all 6 mount points; 2 for the radiator support, and all four body points.  Excellent quality!

PART NUMBER: SUS-214
1967 - 1981 Subframe Body Mount Bushings Set, Self-Locking Interlock Style, 1/2 Inch Drop Height
Our Price: $149.95

Interloc bushings are designed to replace the factory bushings for 67 - 81 Camaro.  They feature a self-locking design that sandwiches the frame and holds it in position.  This design eliminates frame to body slippage.  They are especially recommended if you are installing a subframe connector. Six Interloc bushings are supplied with each kit.  This includes two radiator core support and four main body bushings.  Kits for use with Global West subframe connectors come with four bushings (two core support and two front body mounts).  The rear two bushings come with the subframe connectors.  New hardware included.  These are now only available in black, the blue has been discontinued.

Installation tip: The male portion of the mount goes between the body and frame. The female or cupped portion comes up from underneath and indexes over the step in the male bushing, sandwiching the frame.

PART NUMBER: SUS-416
1967 - 1981 Subframe Body Mount Bushings Set, Self-Locking Interlock Style, Stock Height
Our Price: $149.95

These new Solid Billet Aluminum Interloc Body Bushings are designed to replace the factory bushings on 67 - 81 Camaro.  They feature a self-locking design that sandwiches the frame and holds it in position.  This design eliminates frame to body slippage.  They are especially recommended if you are installing a subframe connector.  Six Interloc bushings are supplied with each kit.  This includes two radiator core support and four main body bushings.   New hardware included.


PART NUMBER: SUS-415
1967 - 1981 Subframe Mounting Hole Repair Washer Plates Set, 4 Pieces
Our Price: $17.95

Four correct gauge hole plates for repair of rusted tops of subframe mounting area on 67 - 81 Camaro.

PART NUMBER: SUS-219
1967-1969 DSE Rear Upper Shock Crossmember
Our Price: $90.00

Rear upper shock crossmember is used when relocating the upper shock mounts inside of the frame rails which is typical when widening the rear wheel tubs.  The crossmember is located between the rear wheel tubs.  It should be mounted through the trunk floorpan to provide additional shock travel when ride height is lower than stock.  This C-section crossmember is made from 1/8" steel.  It adds additional structural integrity to the rear subframe and provides the necessary mounting for inboard upper shock mounts.  It can be used on either staggered or non-staggered shock mounting.

Note: This rear upper shock crossmember is used with the Mini-Tub Kit. This is different from the crossmember used in the QUADRA Link kit.

PART NUMBER: SUS-920
1967-1969 DSE Subframe Connectors
Our Price: $189.95

These high grade Detroit Speed & Engineering weld in subframe connectors will increase your car's stiffness by connecting the front subframe to the rear frame rails.  

PART NUMBER: SUS-528
1967-1981 Body Mount Bolt Hardware Kit, Stainless Steel
1967-1981 Body Mount Bolt Hardware Kit, Stainless Steel
Our Price: $99.95

New high grade stainless body mount bolt set for 67-81 models.  Premium quality hardware set to mount your frame to the body.  Way superior to others on the market.

PART NUMBER: SUS-529
1967-1981 DSE Stock Height Body Mount Bushings
1967-1981 DSE Stock Height Body Mount Bushings
Our Price: $129.95

New high grade body mounts for your bird.  Detroit Speed and Engineering's solid body mount bushings provide a simple approach to eliminating the flex that occurs between the body and subframe connection.  This will improve vehicle handling response by increasing chassis stiffness.  These mount bushings work great fora any model but especially when using subframe connectors for maximum torsional rigidity.  

PART NUMBER: SUS-527
1970 - 1972 Camaro Subframe Body Mount Bushings Set
1970 - 1972 Subframe Body Mount Bushings Set, 12 Pieces
Our Price: $54.95

New correct factory style subframe body mount bushings for your Camaro.  Complete 12 piece kit including all bushings and metal sleeves.  Two for the radiator support, two for the front subframe to front toe board area, and two for the rear subframe to body.
For the hardware set that goes with these, please add either
SUS-214 (OE Style) or SUS-215 (Replacement Style).
PART NUMBER: SUS-210
1970 - 1973 Firewall Brackets Set, Firewall Pan to Subframe Mounted, Pair
Our Price: $124.95

FIREWALL BODY MOUNT BRACE, Left and Right hand firewall braces.  Welds at inner lower firewall pan to subframe.  Includes cage nut.  Premium quality heavy duty steel. Sold in pairs

*Fits all 70 71 72 73 Camaro Models

PART NUMBER: SHE-1018
1970 - 1973 Radiator Support Bushing and Cushion Set, Vertical, Lower Subframe Bracket to Radiator Support, 4 Pieces
Our Price: $22.95

New correct designed bushings and cushions for your classic.  Exact fit for all 70 - 73 camaro models.  This new bushing set is used for the lower subframe brackets that are mounted on the frame and go forward to your radiator support.  These bushings mount vertically, up and down.  Search no more for these ultra rare bushings, here they are!  This set, does one car.

PART NUMBER: SUS-235
1970 - 1973 Subframe Connectors, All Models
Our Price: $319.95

New premium quality front to rear frame connectors for 70 - 73 Camaro. These connectors will greatly stiffen your chassis, help eleminate roll and improve your cars response. The connectors require the use of rear frame interlock body mount bushings that are included.

PART NUMBER: SUS-413
1970-1981 Detroit Speed Subframe Connectors
Our Price: $189.95

Detroit Speed and Engineering's uniquely designed weld-in subframe connectors increase the carís stiffness by connecting the front subframe to the rear frame rails.  Unlike others, DSE subframe connectors are barely visible from underneath the car.

PART NUMBER: SUS-869
1973 - 1981 Camaro Subframe Body Mount Bushings Set
1973 - 1981 Subframe Body Mount Bushings Set, 12 Pieces
Our Price: $59.95

New correct factory style subframe body mount bushings for your Camaro.  Complete 12 piece kit including all bushings and metal sleeves.  Two for the radiator support, two for the front subframe to front toe board area, and two for the rear subframe to body.
For the hardware set that goes with these, please add either
SUS-214 (OE Style) or SUS-215 (Replacement Style).
PART NUMBER: SUS-211
1973 - 1981 Subframe Body Mount Bushings Set NOS GM 12 Pieces
1973 - 1981 Subframe Body Mount Bushings Set, NOS Original GM 12 Pieces
Our Price: $295.00

1973 - 1981 Subframe Body Mount Bushings Set NOS GM 12 Pieces
1974 - 1981 Subframe Connectors, All Models
Our Price: $319.95

New premium quality front to rear frame connectors for 74 - 81 Camaro. These connectors will greatly stiffen your chassis, help eleminate roll and improve your cars response. The connectors require the use of rear frame interlock body mount bushings that are included.
 
PART NUMBER: SUS-414
1980 - 1981 Camaro and Firebird Center Steering Drag Link GM Part # 14013011 NOS
1980 - 1981 Camaro and Firebird Center Steering Drag Link GM Part # 14013011 NOS
Our Price: $250.00

New in box original factory NOS Center Steering Drag Link for your Camaro or Firebird. Original part number 14013011 for your 80 - 81 Camaro or Firebird.

PART NUMBER: 14013011