JOIN ON MAILING LIST!





Online Payment Service


You are here: Home > Suspension
Choose a sub category:
Chassis Bolt Kits Front Suspension Components
Rear Suspension Components Rear Axles and Components
Subframes and Mounting Components Shocks and Components
Sway Bars and Components Suspension Kits
Sort By:
Page of 19  
1967 12-bolt rear End For mono springs
Our Price: $2,495.95

All rear ends are  rebuilt and guaranteed.each includes an eaton posi unit moser axles and your choice of gear ratio.

PART NUMBER: SUS-310
1967 DSE Mini-Tub Kit
Our Price: $1,320.00

A complete rear Mini-Tub kit is available from DSE and includes all necessary parts for a complete project package.
The rear mini-tub kit includes:
- DSE Deep Tubs
- Rear Upper Shock Crossmember
- Rear Upper Shock Mounts
- Offset Shackles
- Rear Leaf Springs
- Adjustable Leaf Spring Pads
- Lower Shock Plates
- U-Bolts
- Mini-Tub Video Including Templates and Detailed Installation Instructions

PART NUMBER: SUS-893
1967 Heavy Duty Rear Sway Bar
Our Price: $159.95

Heavy Duty Rear Sway Bar Kit 3/4 diameter 1967

PART NUMBER: SUS-168
1967 Idler Arm Assembly
Our Price: $59.95

Idler arm  Year(s): 67

PART NUMBER: SUS-23
1967 Lower Control A-Arm Bumper
Our Price: $12.95

Lower control A-arm bumper for 67 models.  Sold each.

Part Number: SUS-40
1967 Major Overhaul Kit
Our Price: $319.00

Major kit standard Inner & outer tie rod ends,upper & lower ball joints,idler arm, pitman arm,all upper and
lower control arm bushings, sway bar end links
Best kit at this price anywhere!!!

PART NUMBER: SUS-3
1967 Major Overhaul Kit
Our Price: $459.00

Major kit manual fast ratio Inner & outer tie rod ends,upper & lower ball joints,idler arm, pitman arm,all upper and
lower control arm bushings, sway bar end links
Best kit at this price anywhere!!!

PART NUMBER: SUS-6
1967 Major Overhaul Kit
Our Price: $339.00

power fast ratio  Inner & outer tie rod ends,upper & lower ball joints,idler arm, pitman arm,all upper and
lower control arm bushings, sway bar end links
Best kit at this price anywhere!!!

PART NUMBER: SUS-7
1967 Major Overhaul Kit
Our Price: $319.00

Major kit manual standard Inner & outer tie rod ends,upper & lower ball joints,idler arm, pitman arm,all upper and
lower control arm bushings, sway bar end links
Best kit at this price anywhere!!!

PART NUMBER: SUS-2
1967 Master Chassis Kit, BB,Disc
Our Price: $279.95

Big block disc brakes Typical kit includes fasteners to attach: accelerator lever & support,axle retainer plates,brake cables,brake plates,brake hose retainers & brackets,brake valve & pressure switch,Calipers & brackets & shield,upper & lower control arm bushings,differential cover,driveshaft,engine mounts,fule filler neck cover,fuel hoses,gas tank grease fittings,idler arm,leaf spring hangers & front eye,master cylender & push rod,Parking brake control,pitman arm,radius rod & Bracket & bumper,Shackles (nuts),shock & brackets,stabilizer bar brackets and end links (includes rubber) steering gear & rag joint,steering linkage & ball joints,spedo cable>Trans,suspension bumpers,trans crossmember & insulator and wheel cylinders

PART NUMBER: SUS-80
1967 Master Chassis Kit, BB,L-78
Our Price: $289.95

Big block L-78 (375 HP) Typical kit includes fasteners to attach: accelerator lever & support,axle retainer plates,brake cables,brake plates,brake hose retainers & brackets,brake valve & pressure switch,Calipers & brackets & shield,upper & lower control arm bushings,differential cover,driveshaft,engine mounts,fule filler neck cover,fuel hoses,gas tank grease fittings,idler arm,leaf spring hangers & front eye,master cylender & push rod,Parking brake control,pitman arm,radius rod & Bracket & bumper,Shackles (nuts),shock & brackets,stabilizer bar brackets and end links (includes rubber) steering gear & rag joint,steering linkage & ball joints,spedo cable>Trans,suspension bumpers,trans crossmember & insulator and wheel cylinders

PART NUMBER: SUS-82
1967 Master Chassis Kit,SB, Z-28
Our Price: $299.95

Small block Z-28 (302) Typical kit includes fasteners to attach: accelerator lever & support,axle retainer plates,brake cables,brake plates,brake hose retainers & brackets,brake valve & pressure switch,Calipers & brackets & shield,upper & lower control arm bushings,differential cover,driveshaft,engine mounts,fule filler neck cover,fuel hoses,gas tank grease fittings,idler arm,leaf spring hangers & front eye,master cylender & push rod,Parking brake control,pitman arm,radius rod & Bracket & bumper,Shackles (nuts),shock & brackets,stabilizer bar brackets and end links (includes rubber) steering gear & rag joint,steering linkage & ball joints,spedo cable>Trans,suspension bumpers,trans crossmember & insulator and wheel cylinders

PART NUMBER: SUS-81
1967 Master Chassis Kit,SB,Disc
Our Price: $274.95

Small block disc brakes Typical kit includes fasteners to attach: accelerator lever & support,axle retainer plates,brake cables,brake plates,brake hose retainers & brackets,brake valve & pressure switch,Calipers & brackets & shield,upper & lower control arm bushings,differential cover,driveshaft,engine mounts,fule filler neck cover,fuel hoses,gas tank grease fittings,idler arm,leaf spring hangers & front eye,master cylender & push rod,Parking brake control,pitman arm,radius rod & Bracket & bumper,Shackles (nuts),shock & brackets,stabilizer bar brackets and end links (includes rubber) steering gear & rag joint,steering linkage & ball joints,spedo cable>Trans,suspension bumpers,trans crossmember & insulator and wheel cylinders

PART NUMBER: SUS-79
1967 Master Chassis Kit,SB,drum
Our Price: $259.95

Small block drum brakes Typical kit includes fasteners to attach: accelerator lever & support,axle retainer plates,brake cables,brake plates,brake hose retainers & brackets,brake valve & pressure switch,Calipers & brackets & shield,upper & lower control arm bushings,differential cover,driveshaft,engine mounts,fule filler neck cover,fuel hoses,gas tank grease fittings,idler arm,leaf spring hangers & front eye,master cylender & push rod,Parking brake control,pitman arm,radius rod & Bracket & bumper,Shackles (nuts),shock & brackets,stabilizer bar brackets and end links (includes rubber) steering gear & rag joint,steering linkage & ball joints,spedo cable>Trans,suspension bumpers,trans crossmember & insulator and wheel cylinders

PART NUMBER: SUS-78
1967 Mono Leaf Rear End Shock Plate
Our Price: $44.95

LH mono leaf shock plate

PART NUMBER: SUS-165
1967 Original Style Subframe
Our Price: $1,795.00

New Style Farmes With Correct Weld Beads,Bends,Bracket Locations and cut out holes.Correct appearance with the strenth and accuracy of new steel with up to date technology.

PART NUMBER: SUS-447
1967 Rear Axle Frame Bumper
Our Price: $19.95

Mounts inside the rear wheel well to the frame rail. Each

PART NUMBER: SUS-159
1967 Rear Disc Brake Conversion Kit
Our Price: $499.95

Includes; calipers  brackets  pads  rotors  brake hoses  lines  hardware  and instructions. Super cool addition to any 10 or 12-bolt rear end.

PART NUMBER: SUS-191
1967 Rear End Axle Filler Plug Bolt
Our Price: $15.95

Rear axle filler plug bolt 1" for 67 Camaro.

PART NUMBER: SUS-305
1967 Rear End Axle Posi Tag Red
Our Price: $10.95

Posi Tag Red 1 Inch Hole for 67 Camaro.

PART NUMBER: SUS-195
1967 Round Rod Rear Axle Traction Bar Rebuild And Mounting Kit
Our Price: $49.95

Correct 67 traction bar rebuild set.  This kit is for the "round" version of the original gm style bar.
Includes; Front and rear bushings, bolts, nuts, correct lock washers, and install sheet.
Premium quality, and made in the USA!

PART NUMBER: SUS-237
1967 Round Traction Bar With Bushings
Our Price: $194.00

Camaro traction bar, radius rod, round traction bar with bushings installed. This radius rod mounts on the passenger side only. This radius rod is used on the 12 bolt rear axles with the bracket welded in place. This bracket is the version with 1 set of holes. The version with 2 sets of holes uses the square traction bar.

PART NUMBER: SUS-909
1967 Shock Plates for Non-Staggered Set up
Our Price: $70.00

67 Non-staggered shock plates. Use our lower shock plates with our adjustable leaf spring pads and U-bolts. The shock plates are stronger than stock and use 1/2" U-bolts and a 1/2" bolt for the lower shock mount. They come in an electroplate finish

Part Number: SUS-1008
1967 Square Style Traction Bar Axle Tube Bracket
Our Price: $64.95

Correct heavy steel bracket that welds to your rear end Axle tube. Radius rod to axle tube mounting bracket, RH only. This bracket supports and attaches the traction bar.

PART NUMBER: SUS-915
1967 Square Style Traction Bar Rubber Bumper Pad
Our Price: $69.00

Camaro square traction bar rod rubber snubber, mounts on the rear traction bar slapper bracket. Made in the USA!  

PART NUMBER: SUS-914
1967 Square Traction Bar With Bushings
Our Price: $209.00

Camaro traction bar, radius rod, square traction bar with bushings installed. This radius rod mounts on the passenger side only. This radius rod is used on the 12 bolt rear axles with the bracket welded in place. This bracket is the version with 2 sets of holes. The version with 1 set of holes uses the round traction bar.

PART NUMBER: SUS-912
1967 Traction Bar Floor Mount Plate
Our Price: $99.00

Traction bar floor plate, with attached studs. This plate is used specifically to support the traction bar to the floor pan on the passenger side. In October 1966 General Motors needed to counter the Camaro's wheel hop problem. They came up with the radius rod traction bar.  

PART NUMBER: SUS-916
1967 Traction Bar Rear End Bracket For Square Style Bar
Our Price: $94.00

Square traction bar bracket, rear axle mounted slapper bracket. This bracket is only used with the square traction bar.

PART NUMBER: SUS-913
1967 Traction Bar Rod to Body Mount Bracket
Our Price: $64.95

This bracket mounts to the under body floor Plate and the RH frame rail. Forward traction bar bracket for square or round radius rod.

PART NUMBER: SUS-917
1967-1968 Big Block Manual Rack And Pinion Cradle Kit
Our Price: $1,459.95

Bolt-in Manual Rack and Pinion Cradle Kit. The popular Flaming River Rack and Pinion Cradle Kits are designed for Big Block applications! Precision fixture-welded cradles are designed with the appropriate clearance for your choice of power or manual rack and pinion steering. Structurally reinforced system cradles your rack.


Column upgrade includes: Tilt column wiring connector, universal joints, wiring harness with hazards, column mount, horn contact kit, horn relay and u-joint

PART NUMBER: STE-216