|
|
|
|
|
|
1967 302 Z28 Crankcase Vent Hose
|
Our Price: $15.95
|
|
|
302 vent hose molded Year(s): 67
PART NUMBER: AIR-33
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 Closed Element Air Cleaner Assembly Black Lid
|
|
Our Price: $139.95
|
|
|
New complete air cleaner assembly. Works great on all models with a 4-barrel carb. Includes black lid with installed inner rubber seal, breather filter, and inner tube with spark arrestor cap.
PART NUMBER: AIR-7
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 Closed Element Air Cleaner Assembly Chrome Lid
|
|
Our Price: $149.95
|
|
|
New complete air cleaner assembly. Works great for all models with a 4-barrel carburetor. Includes chrome lid with installed rubber lip seal, breather filter, and inner tube with spark arrestor cap.
PART NUMBER: AIR-8
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 PCV System Valve 302
|
|
Our Price: $39.95
|
|
|
302 PCV valve screw in type. Correct style made in the USA. Year(s): 67
PART NUMBER: AIR-25
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Air Cleaner Element Filter
|
|
Our Price: $6.95
|
|
|
All closed element. For closed element air cleaners Year(s): 67 68 69
PART NUMBER: AIR-11
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Air Cleaner Element Filter
|
|
Our Price: $8.95
|
|
|
Replacement element. For open element or cowl induction. Year(s): 67 68 69
PART NUMBER: AIR-9
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Air Cleaner Filter Correct
|
|
Our Price: $42.95
|
|
|
Correct reproduction with lettering and mesh. For open element or cowl induction. Year(s): 67 68 69
Part Number: AIR-10
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille
|
|
Our Price: $24.95
|
|
|
Super cool cowl hood filler. Got a cowl hood on your car and dont wnat to do the flapper set up? Stop staring at the open hole at the rear of your cowl hood. Heres the answer, this new filler panel mounts to existing holes in all cowl hoods. Galvanized Steel.
PART NUMBER: AIR-62
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille - Fine Lines, Black
|
|
Our Price: $29.95
|
|
|
Getting tired of looking at that lopsided hole in the back side of your cowl hood? Here is a grille that cleans that area up and makes it more symmetrical looking. It'll keep those pesky birds and leaves ( and sometimes windshield wipers) out of your air cleaner. We know the cowl hoods were only available on the '69s, but since they fit all first gens, they have been installed on all 3 years. In case you are concerned about airflow, the total throttle plate area of a Holley 1050 is 9.6 sq.inches, the total open area of these grilles is 21sq.inches. More than adequate. These are made of 16ga aluminum so they will lay flat against the uneven surface around the opening. The factory did a so-so job of threading the mounting holes, so running a tap in them first is strongly suggested.
Part Number: AIR-623
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille - Fine Lines, Clear
|
|
Our Price: $29.95
|
|
|
Getting tired of looking at that lopsided hole in the back side of your cowl hood? Here is a grille that cleans that area up and makes it more symmetrical looking. It'll keep those pesky birds and leaves ( and sometimes windshield wipers) out of your air cleaner. We know the cowl hoods were only available on the '69s, but since they fit all first gens, they have been installed on all 3 years. In case you are concerned about airflow, the total throttle plate area of a Holley 1050 is 9.6 sq.inches, the total open area of these grilles is 21sq.inches. More than adequate. These are made of 16ga aluminum so they will lay flat against the uneven surface around the opening. The factory did a so-so job of threading the mounting holes, so running a tap in them first is strongly suggested.
Part Number: AIR-622
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille - Fine Lines, Polished
|
|
Our Price: $29.95
|
|
|
Getting tired of looking at that lopsided hole in the back side of your cowl hood? Here is a grille that cleans that area up and makes it more symmetrical looking. It'll keep those pesky birds and leaves ( and sometimes windshield wipers) out of your air cleaner. We know the cowl hoods were only available on the '69s, but since they fit all first gens, they have been installed on all 3 years. In case you are concerned about airflow, the total throttle plate area of a Holley 1050 is 9.6 sq.inches, the total open area of these grilles is 21sq.inches. More than adequate. These are made of 16ga aluminum so they will lay flat against the uneven surface around the opening. The factory did a so-so job of threading the mounting holes, so running a tap in them first is strongly suggested.
Part Number: AIR-624
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille - Wide Lines, Black
|
|
Our Price: $29.95
|
|
|
Getting tired of looking at that lopsided hole in the back side of your cowl hood? Here is a grille that cleans that area up and makes it more symmetrical looking. It'll keep those pesky birds and leaves ( and sometimes windshield wipers) out of your air cleaner. We know the cowl hoods were only available on the '69s, but since they fit all first gens, they have been installed on all 3 years. In case you are concerned about airflow, the total throttle plate area of a Holley 1050 is 9.6 sq.inches, the total open area of these grilles is 21sq.inches. More than adequate. These are made of 16ga aluminum so they will lay flat against the uneven surface around the opening. The factory did a so-so job of threading the mounting holes, so running a tap in them first is strongly suggested.
Part Number: AIR-626
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille - Wide Lines, Clear
|
|
Our Price: $29.95
|
|
|
Getting tired of looking at that lopsided hole in the back side of your cowl hood? Here is a grille that cleans that area up and makes it more symmetrical looking. It'll keep those pesky birds and leaves ( and sometimes windshield wipers) out of your air cleaner. We know the cowl hoods were only available on the '69s, but since they fit all first gens, they have been installed on all 3 years. In case you are concerned about airflow, the total throttle plate area of a Holley 1050 is 9.6 sq.inches, the total open area of these grilles is 21sq.inches. More than adequate. These are made of 16ga aluminum so they will lay flat against the uneven surface around the opening. The factory did a so-so job of threading the mounting holes, so running a tap in them first is strongly suggested.
Part Number: AIR-625
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Filler Grille - Wide Lines, Polished
|
|
Our Price: $29.95
|
|
|
Getting tired of looking at that lopsided hole in the back side of your cowl hood? Here is a grille that cleans that area up and makes it more symmetrical looking. It'll keep those pesky birds and leaves ( and sometimes windshield wipers) out of your air cleaner. We know the cowl hoods were only available on the '69s, but since they fit all first gens, they have been installed on all 3 years. In case you are concerned about airflow, the total throttle plate area of a Holley 1050 is 9.6 sq.inches, the total open area of these grilles is 21sq.inches. More than adequate. These are made of 16ga aluminum so they will lay flat against the uneven surface around the opening. The factory did a so-so job of threading the mounting holes, so running a tap in them first is strongly suggested.
Part Number: AIR-627
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Cowl Induction Hood Trim Plate For GM Hoods
|
|
Our Price: $59.95
|
|
|
New custom rear hood filler trim plate. Exact fit for all 67-69 GM cowl induction hoods. A very nice addition to any classic. Includes mounting hardware.
PART NUMBER: AIR-97
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Open Element Air Cleaner Base
|
|
Our Price: $49.95
|
|
|
Open element base. Nice high quality reproduction. Lower breather tube attached. Year(s): 67 68 69
PART NUMBER: AIR-4
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1969 Open Element Air Cleaner Lid Black
|
|
Our Price: $29.95
|
|
|
Black correct reproduction. For open element and cowl induction. Air cleaners 14”. Year(s): 67 68 69
PART NUMBER: AIR-3
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1972 Air Cleaner Flame Arrestor
|
|
Our Price: $9.95
|
|
|
Metal mesh cap. Superior reproduction of original. Nice. Year(s): 67 68 69 71 72
PART NUMBER: AIR-15
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1972 Big Block Crankcase Vent Elbow Hose
|
|
Our Price: $5.95
|
|
|
Correct one inch diameter rubber hose that goes from your valve cover to the air cleaner base.
PART NUMBER: AIR-32
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1972 Big Block PCV Hose Clip
|
|
Our Price: $15.95
|
|
|
396/375 PCV hose clip Year(s): 67 68 69 70 71 72
PART NUMBER: AIR-31
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1972 PCV System Valve SB 327, 350
|
|
Our Price: $5.95
|
|
|
Valve 327 350 Correct style made in the USA. Year(s): 67 68 69 70 71 72
PART NUMBER: AIR-24
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1972 SB Open Element Air Cleaner Crankcase Vent Hose
|
|
Our Price: $12.95
|
|
|
Correct for all Small Block models, except 69 with cowl induction. Year(s): 67 68 69 70 71 72
PART NUMBER: AIR-34
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1973 Closed Element Air Cleaner Lid
|
|
Our Price: $44.95
|
|
|
Black lid 4-barrel includes rubber seal dia. 16-7/8” Year(s): 67 68 69 71 72 73
PART NUMBER: AIR-6
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1973 PCV Valve
|
|
Our Price: $5.95
|
|
|
67-72 big block and 68-73 all small block excluding 302. Correct style made in the USA. Year(s): 67 68 69 70 71 72 73
PART NUMBER: AIR-23
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1973 Small Block Valve Cover Elbow Pipe
|
|
Our Price: $12.95
|
|
|
Correct metal pipe that goes from your valve cover up toward the air cleaner base. Correct for 67-73 small block engines.
Connects with your rubber hose to help vent the crankcase.
PART NUMBER: ENC-104
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1974 Big Block Valve Cover Elbow
|
|
Our Price: $15.95
|
|
|
67-74 big block valve cover elbow; goes from valve cover up toward your air cleaner base to connect with hose.
PART NUMBER: ENC-105
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1974 BIg Block Valve Cover Grommets
|
|
Our Price: $7.95
|
|
|
67-74 grommet set for big block valve covers
PART NUMBER: ENC-107
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1974 PCV System Hose and Clamps
|
|
Our Price: $10.95
|
|
|
Molded 90 degree end. Year(s): 67 68 69 70 71 72 73 74
PART NUMBER: AIR-30
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1974 Small Block Valve Cover Grommets
|
|
Our Price: $7.95
|
|
|
Pair of 67-74 small block valve cover grommets
PART NUMBER: ENC-106
|
|
|
|
|
|
|
|
|
|
|
|
|
1967-1981 Air Cleaner 14"
|
|
Our Price: $29.95
|
|
|
New replacement 14" air filter. Original look open element design. Correct drop style base, but does not have the vent tube going down toward your valve covers. 14" diameter and 3" height.
Part Number: ENC-872
|
|
|
|
|
|
|
