 |
 |
 |
|
1968 - 1969 Camaro Front and Rear Power Window Kit, Premium Quality Made in the USA
New complete power window kit for your 1968 - 1969 Camaro. Exact fit for all 68 - 69 models. Includes; both FRONT and REAR, left hand and right hand regulators, 4 power motors, wiring harnesses, rubber door jam boots, and hardware. This set comes standard with a plastic chrome style switch. You can upgrade to a metal chrome style switch or several other styles! Don't forget to choose your desired switches and location. Several styles to choose from and either center console or on your door panels. By far the best kit on the market... Premium Quality!
*See Technical Specs for switch options and pricing.
~~NOTE: This is not a universal cheap imported power window kit. This kit is specifically made for your 1968 or 1969 Camaro right here in the USA! Please double check your options as each kit is especially made for you and are non-refundable.
Kit includes: 4 regulators (front left & front right side)(rear left & rear right side), 4 new ACI motors, completed wire harness, choice of switches, and conduit to protect the wires going thru the door.
PART NUMBER: DWN-623
- (402) Door Mount, Plastic: Bezel: Quad: length = 4-7/16"; height = 1-13/16", Single: length = 2" height = 1-3/4", Hole Size: Quad; length = 3-13/16; height = 1-1/4". Single: length = 1-3/8"; height = 1-1/4".
(408) Door Mount, OE Style, ADD $145: Bezel: Double: length = 2-1/2"; height = 1-7/8" Single; length = 1-11/16"; height = 1-3/4" Hole: Double: Length = 2-3/8"; Height = 1-3/8" Single: length = 1-5/8"; height = 1-1/4" Looks like Factory Original Style
(414) Door Mount, NU-CRANKS SWITCH (USE YOUR ORIGINAL WINDOW CRANK) ADD $300: GM Large Round Spline - Shorter Length: Switch Housing: 2-1/4" x 3" Shaft Length" 7/8" (to include housing 1-1/2") Spline OD: 29/64" (.453) Spline ID: 7/16" (.437). Looks like cranks, but its a switch!
(404) Console Mount, Chrome Plastic: Bezel: Quad: length = 4-7/16"; height = 1-13/16". Hole Size: Quad: length = 3-13/16"; height = 1-1/4". Custom Look!
(406) Console Mount, BLACK ILLUMINATED: Bezel: Double length = 2"; height = 1-13/16". Hole Size: Double: length = 1-13/16"; height = 1-5/8". Custom Look!
(410) Console Mount, Chrome Metal, ADD $145: Bezel: Quad: length = 4-1/4"; height = 1-7/8". Hole Size: Quad: length = 4-1/16"; height = 1-1/4". Custom Look!
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1968 - 1969 Camaro SPECIFIC- bolt into original mounting holes
- FRONT and REAR Power Window Kit
- Uses Stock Channels
- New OEM Style Motors
- Made of 1018 cold roll steel
- Brass oilite thrust bearings at pivots
- Treated gear plates for longer teeth life
- Made to Fit Camaro Curved Glass
- Kits include power window switches / completed wire harness and conduit
- Lifetime warranty (Warranty requires copy of sales receipt or invoice)
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
1968 - 1969 Camaro Door Window Glass Plates Installation Kit
|
|
1967 - 1969 Quarter Window Glass Assembly Kit, Convertible, Clear, RH
|
|
1968 - 1969 Camaro Complete RH Door Window Glass Assembly Kit with Tracks, CLEAR
|
|
1967 - 1969 Camaro Quarter Window Glass Attachment Roller Mounting Plate Assembly, RH
|
|
|
|
|
|
|
|
|
|
|
|
|
1968 - 1969 Camaro Door Window Glass Guide, Rear
|
|
1968 - 1969 Camaro Complete LH Door Window Glass Assembly Kit with Tracks, CLEAR
|
|
1967 - 1981 Camaro Door Glass Window Roller Nut Tool
|
|
1967 - 1969 Quarter Window Roller Center Lower Guide with Installation Nuts, Each
|
|
|
|
|
|
|
|
|
|
|
|
|
1968 - 1969 Door Panel Water Shields Set, Coupe Front and Rear
|
|
1967 - 1969 Quarter Window Glass Assembly Kit, Convertible, Clear, LH
|
|
1967 - 1969 Camaro Quarter Window Glass Attachment Roller Mounting Plate Assembly, LH
|
|
1968 - 1969 Camaro Door Window Glass Guide, Front, 7698543
|
|
|
|
|
|
|
|
|
|
|
|
|
power windows 
