You are here: Home > Steering
Choose a Sub Category:
Steering Wheels & Components Complete Steering Wheel Kits
Horns & Horn Relays Steering Columns & Components
Steering Coupler Rag Joints
Sort By:
Page of 10
1967 - 1968 CHROME Steering Wheel Mounting Hub
Our Price: $54.95

New CUSTOM CHROME mounting hub for your GM steering wheel.  Direct fit for all 67 - 68 Chevy Camaro models with a wood or 3 spoke comfort grip steering wheel.  Also fits most GM steering columns that have the ignition on the dash like Corvette, Impala, El Camino, Chevelle, Truck...ECT.  Exact diameter and details.  This hub is only needed for wood style or comfort grip style wheels.  Order your new heavy chrome plated hub today!

Replaces GM Part Number 3930062 but in CHROME!!

Spacer included to fit both flat spoke wheels and spoke wheels that overlap.

PART NUMBER: STE-82C
1967 - 1968 Horn Cap Mounting Ring
Our Price: $4.95

Rubber horn mount ring for 67 - 68 Camaro.

PART NUMBER: STE-41
1967-1968 Steering Wheel Horn Cap Mounting Set
1967 - 1968 Horn Cap Mounting Set, Standard
Our Price: $29.95

This horn button install kit for 67 - 68 Camaro is for Deluxe style wheels with chrome tri-bar insert and the standard wheel.  This kit is compatable with STE-28, STE-30, or STE-205

PART NUMBER: STE-32
1967-1968 Horn Cap Mounting Kit Wood/Comfort Grip
1967 - 1968 Horn Cap Mounting Set, Wood or Comfort Grip
Our Price: $29.95

Hardware for horn operation and horn cap mounting for 67 - 68 Camaro. For comfort grip and wood style wheels.

PART NUMBER: STE-85
1967 - 1968 Camaro Horn Contact Cam, Non-Tilt, GM Original Used - Used GM 399296
1967 - 1968 Horn Contact Cam, Non-Tilt, GM Original Used
Our Price: $27.00

Vintage GM horn contact cam for your camaro.  Exact fit for all 1967 - 1968 models without a tilt steering column.  Correct shape, size, and fit.  Currently available as a GM used item only.  Replaces original part numbers stamped 399296 , 396202 , 3900512 , and 9787616 . The one you will receive will look similar to the one pictured.

PART NUMBER: STE-111A
1967 - 1968 Horn Contact Cam, Tilt, OE Style
Our Price: $12.95

New OE style horn contact cam for your camaro.  Exact fit for all 1967 - 1968 models with a tilt steering column.  Replaces original GM perfectly.  Correct shape, size, and fit.

PART NUMBER: STE-111
1967 - 1968 Horns Set, High and Low Notes, Pre-Welded Mounting Brackets, OE Style
Our Price: $129.95

Brand new low note and high note horn set for 67 - 68 Camaro.  Correct spot welded mounting brackets.  Features exact "DELCO-REMY" and "MADE IN THE USA" lettering.  These horns look just like original GM units.  Now you can fix your broken horns!

PART NUMBER: STE-122
1967 - 1968 Steering Column Bearing and Housing Assembly, Non-Tilt, Floor Shift, Lower
Our Price: $87.95

Finally we have the lower steering column bearing for you 67-68 Camaro floor shift without tilt. This is a high quality lower bearing assembly, housing machined from strong and durable Delrin material. No modifications to column are required.

PART NUMBER: STE-180
1967 - 1968 Steering Column Bearing and Housing Assembly, Tilt, Floor Shift, Lower
Our Price: $87.95

Finally we have the lower steering column bearing for you 67-68 Camaro floor shift with tilt. This is a high quality lower bearing assembly, housing machined from strong and durable Delrin material. No modifications to column are required.


Part Number: STE-181
1967 - 1968 Steering Column Bearing Only, Tilt, Floor Shift, Lower
Our Price: $39.95

Finally we have the lower steering column bearing for you 67-68 Camaro floor shift with tilt. This is a high quality lower bearing only, and no modifications to column are required. If you need the housing, see part # STE-181. Made in the USA!


Part Number: STE-181A
1967 - 1968 Steering Column Bearing Only, Tilt, Floor Shift, Upper
Our Price: $39.95

Finally we have the upper steering column bearing for you 67-68 Camaro with tilt. This is a high quality upper bearing only, and no modifications to column are required. Made in the USA!

Part Number: STE-184
1967-1968 Upper Steering Column Bearing - Without Tilt
1967 - 1968 Steering Column Bearing, Non-Tilt, Floor Shift, Upper
Our Price: $59.95

Correct upper steering column bearing for your camaro.  Exact fit for all 67 - 68 model columns without tilt.  This is a used GM part stamped 5698362.  Guaranteed to fit and work smooth.  

*Also fits 66-67 Chevy II and Nova.

PART NUMBER: STE-183
1967 - 1968 Steering Column Cover Mounting Hardware Set, Under Dash
Our Price: $3.49

New 67-68 Camaro under dash steering column cover mounting hardware set.  Correct screws.

PART NUMBER: STE-343
1967 - 1968 Steering Column Cover, Lower Dash, Black, 2 Pieces
Our Price: $29.95

Steering column to dash cover for 67-68 Camaro models.  RH and LH pair.  Black only.

Part Number: STE-8
1967 - 1968 Steering Column Firewall Mounting Plates
Our Price: $49.95

New!  Correct steering column mount plate set.  Exact fit for all 67-68 Camaro models with or without tilt column.  Firewall panel plate set mounts your column to the firewall.  Premium quality.

PART NUMBER: STE-129
1967 - 1968 Steering Column Firewall Plate Mounting Hardware
1967 - 1968 Steering Column Firewall Mounting Plates Hardware Set, 8 Pieces
Our Price: $7.95

Correct column firewall plate hardware mount set.  Correct bolts, screws, and rubber sealing washers for all 67 - 68 Camaro models.

PART NUMBER: STE-127
1967 - 1968 Steering Column Installation Kit, Manual, Custom
Our Price: $209.99

Custom steering column Kit for 67-68 Camaro models.  Use Custom non-key columns.  Fits all 67-8 models with manual steering.

Part Number: STE-211
1967 - 1968 Steering Column Installation Kit, Power, Custom
Our Price: $209.99

Custom steering column Kit for 67-68 Camaro models.  Use Custom non-key columns.  Fits all 67-8 models with power steering.

Part Number: STE-210
1967 - 1968 Steering Column Mounting Bracket Rods Set, Dash, GM Original Used
Our Price: $75.00

Correct set of the three rods needed to secure your column mount brace to the dash in 67 - 68 Camaro.  Currently available as an original GM used set only.  The ones you will receive will look similar to the ones pictured.

PART NUMBER: STE-371B
1967 - 1968 Steering Column Mounting Bracket, Under Dash
Our Price: $69.95

Correct 67 - 68 Camaro Column Mounting Brace with installed wedges.  Mounts the column to the inderside of the dash.  Fits all models 1967 and 1968 Camaro.

PART NUMBER: STE-371
1967 - 1968 Steering Column to Firewall Seal
Our Price: $6.95

New correct steering column to firewall seal. Exact fit for all 67 - 68 Camaro models, with or without tilt column. Replace your damaged or missing unit today!

PART NUMBER: WEA-70
1967 - 1968 Steering Column Wiring Connector, Tilt, Custom
1967 - 1968 Steering Column Wiring Connector, Tilt, Custom
Our Price: $24.95

New female wiring harness plug for your Custom Tilt Columns. Supplied with 10 wire terminals. Can be used to adapt any existing wiring harness to mate with FR 4-1/2" connector. Fits 67 - 68 Camaro models with custom steering columns.

Part Number: STE-251
1967 - 1968 Steering Column, Non-Tilt, Floor Shift, GM Original Rebuilt
Our Price: $369.95

Original style GM rebuilt steering column for your camaro.  Exact fit for all 67 - 68 models.  This column is restored to show quality condition and comes ready to install.  Lower coupler to mount at your rag joint is pre-installed.  Painted the correct black color shade.  Turn lever is NOT included.  Must use your original or purchase separately.  Correct collapsible safety mesh shaft.  Lifetime guarantee.

Part Number: STE-1
1967 - 1968 Steering Column, Tilt, Floor Shift, Black Powdercoat Finish, USA
Our Price: $549.95

This direct fit column fits the original dash mount in a 1967-68 Camaro with floor shift and also accepts the original rag joint flange. A compact shroud create a unique new custom look. Each column comes complete with a billet dress up kit (Tilt/turn signal levers and hazard knob), GM wiring (4-1/4 inch connector) and an all new canceling cam.

This isn't a rebuilt junkyard column, but rather an all new engineered column featuring all new components. Made in the USA.

Note: STE-251 Wiring Adapter is recommended for installation.

Part Number: STE-212
1967 - 1968 Steering Column, Tilt, Floor Shift, Custom, Choice of Finish
Our Price: $449.95

Add the convenience and reliability of a new column built specific for 67 - 68 Camaro. This steering column is not a universal column that requires modification of your original vehicle to install.  Simply remove your old column, saving your original under dash mount as well as the original floor mount.  Choose Your Finish
 
Part Number: STE-312
1967 - 1968 Steering Column, Tilt, Floor Shift, OE Factory Style, GM Original Rebuilt
Our Price: $599.95

Completely restored original GM tilt steering column for your camaro.  This column is show quality and ready to install.  Adding one of our tilt columns to your machine will bring authenticity and value.  Need more room to get in and out, this is the answer!!  Black in color, can be painted any color desired.  If your a regular column and just want to add the tilt column, its a direct bolt in for any 67 - 68 model, super easy!  Lifetime guarantee.

Part Number: STE-13
1967 - 1968 Steering Column, Tilt, Floor Shift, Paintable Mill Finish, USA
Our Price: $449.95

This direct fit column fits the original dash mount in a 1967-68 Camaro with floor shift and also accepts the original rag joint flange. A compact shroud create a unique new custom look. Each column comes complete with a billet dress up kit (Tilt/turn signal levers and hazard knob), GM wiring (4-1/4 inch connector) and an all new canceling cam.

This isn't a rebuilt junkyard column, but rather an all new engineered column featuring all new components. Made in the USA.

Note: STE-251 Wiring Adapter is recommended for installation.

Part Number: STE-208
1967 - 1968 Steering Column, Tilt, Floor Shift, Polished Stainless Steel, USA
Our Price: $549.95

This direct fit column fits the original dash mount in a 1967-68 Camaro with floor shift and also accepts the original rag joint flange. A compact shroud create a unique new custom look. Each column comes complete with a billet dress up kit (Tilt/turn signal levers and hazard knob), GM wiring (4-1/4 inch connector) and an all new canceling cam.

This isn't a rebuilt junkyard column, but rather an all new engineered column featuring all new components. Made in the USA.

Note: STE-251 Wiring Adapter is recommended for installation.

Part Number: STE-209
1967 - 1968 Steering Rack and Pinion Cradle Kit, Manual, Big Block
Our Price: $1,459.95

Bolt-in Manual Rack and Pinion Cradle Kit for 67 - 68 Camaro Big Block. The popular Flaming River Rack and Pinion Cradle Kits are designed for Big Block applications! Precision fixture-welded cradles are designed with the appropriate clearance for your choice of power or manual rack and pinion steering. Structurally reinforced system cradles your rack.


Column upgrade includes: Tilt column wiring connector, universal joints, wiring harness with hazards, column mount, horn contact kit, horn relay and u-joint

PART NUMBER: STE-216
1967 - 1968 Steering Rack and Pinion Cradle Kit, Manual, Small Block
Our Price: $1,144.50

Flaming River has designed a direct bolt-in steering system that utilizes a manual rack and pinion engineered for 67 - 68 Camaro!  The rack and pinion has a travel and ratio with full turning radius that feels almost like power steering!  The best part of this system is that it installs easily (within hours) using the existing chassis hole locations.  Patented cradle technology and the most complete kit on the market.

Add your choice of a Polished, Paintable, or Black Powder Coated steering column to make a complete kit.  Adding a column upgrade with this kit will also include: universal joints, shafts, wiring harness with hazards, column mount, horn contact kit, horn relay and u-joint.

Part Number: STE-226