You are here: Home > Bumpers
Choose a Sub Category:
Front & Rear Bumpers Bumper Mounting Hardware
Front Bumper Brackets Rear Bumper Brackets
Bumper Guards
Sort By:
Page of 5
1967 - 1968 Bumper Bracket, Front LH
Our Price: $21.95

LH front bumper bracket. 67-68 Camaro.

PART NUMBER: BUM-39
1967 - 1968 Bumper Bracket, Front RH
Our Price: $21.95

RH front bumper bracket for your 67-68 Camaro.

PART NUMBER: BUM-38
1967 - 1968 Bumper Bracket, Rear Center
Our Price: $18.95

Stamped steel 67-68 Camaro rear bumper center mount bracket. Accurate mounting angle positions bumper in level postion. If your rear bumper tilts its ends downward when installed, this is the most likely fix. Coated black. Officially Licensed GM Restoration Parts.

Part Number: BUM-62
1967 - 1968 Bumper Brackets Hardware Set, Front
Our Price: $19.95

New correct bumper bracket hardware set for 67 - 68 Camaro.  Exact kit to mount your long center front bumper brackets at the subframe.  Includes correct serrated washer.  16 piece kit.

PART NUMBER: BUM-539
1967 - 1968 Bumper Brackets Set, Rear, 5 Pieces
Our Price: $54.95

Complete set all five brackets for 67 - 68 Camaro. Contains parts, Bum-61 and Bum-62.


PART NUMBER: BUM-63
1967 - 1968 Bumper Brackets Set, Rear, Mounting
Our Price: $39.95

Accurate inner and outer RH and LH rear bumper mounting brackets for 67 - 68 Camaro. Each includes correct welded on blind insert nuts as original. Black EDP coated. Officially Licensed GM Restoration Parts.

Part Number: BUM-61
1967 - 1968 Bumper Guard Brackets, Rear, Standard, Pair
Our Price: $15.95

Rear bumper standard guard lower mounting brackets for 67 - 68 Camaro. Sold by the pair.

PART NUMBER: BUM-21
1967 - 1968 Bumper Guard Insert, Rear, Rubber, Deluxe
1967 - 1968 Bumper Guard Insert, Rear, Rubber, Deluxe
Our Price: $12.95

New rear bumper guard rubber insert for your Camaro. Exact fit for all 67 - 68 deluxe style rear bumper guards. Quality molded rubber guard insert with steel spine and threaded studs as original. Replaces original GM part number 3891697 perfectly. Includes mounting nuts and small washers for a quick install. Two required per car, sold as each.

PART NUMBER: BUM-30
1967 - 1968 Bumper Guard Mounting Brackets, Front
Our Price: $7.95

Mounting brackets pair for 67 - 68 Camaro.

PART NUMBER: BUM-19
1967 - 1968 Bumper Guard Mounting Brackets, Rear, Deluxe, Pair
Our Price: $7.95

New correct design bumper guard brackets for your camaro.  Exact fit for all 67 - 68 models with the full size, deluxe bumper guards.  Accurately die stamped and silver cad plated mounting brackets.  Mounts both deluxe optional rear bumper guards.

Part Number: BUM-27B
1967 - 1968 Bumper Guard, Rear, LH or RH, Chrome, Each
Our Price: $54.95

Rear full size guard with brackets and rubber insert quality reproduction RH or LH each. Fits 67 - 68 Camaro.

PART NUMBER: BUM-22
1967 - 1968 Bumper Guards, Front, Chrome, Pair
Our Price: $139.95

Correct front full size bumper guard set for 67 - 68 Camaro. Includes rubber inserts, mounting brackets and hardware. Sold in a pair only.

PART NUMBER: BUM-18
1967 - 1968 Bumper Guards, Rear, Chrome, Deluxe, Pair
Our Price: $105.95

Set of full size guards with mounts and rubbers for 67 - 68 Camaro. Sold by the pair.

PART NUMBER: BUM-23
1967 - 1968 Bumper Guards, Rear, Chrome, Pair
Our Price: $49.95

Correct rear standard bumper guards, bumperettes for 67 - 68 Camaro. Sold in a pair only.

PART NUMBER: BUM-20
1967-1968 Front Chrome Bumper
1967 - 1968 Bumper, Front, Chrome
Our Price: $109.95

Front chrome bumper excellent reproduction for your 67-68 Camaro, beautiful chrome finish.

PART NUMBER: BUM-1

Installation Note: Please do not over tighten. If you crank down too tight it will damage the chrome.
1967 - 1968 Bumper, Front, Chrome, GM NOS
1967 - 1968 Bumper, Front, Chrome, GM NOS
Our Price: $600.00

Ultra rare new old stock bumper for your Camaro. Exact fit for all 1968 models, works great for 67s as well. Still in the old school GM brown paper wrap. The real deal!

**Note ~ The 1967 bumper, part number 3886690, has one hole on the bottom center for mounting front license plate holder to the bumper. The 1968 bumper, part number 3929954, has 2 extra holes there for mounting the center small bracket with rubber bumper stopper.

PART NUMBER: 3929954

Installation Note: Please do not over tighten. If you crank down too tight it will damage the chrome.
1967-1968 Rear Chrome Bumper
1967 - 1968 Bumper, Rear, Chrome
Our Price: $109.95

67-68 Camaro Rear chrome bumper.

PART NUMBER: BUM-9

Installation Note: Please do not over tighten. If you crank down too tight it will damage the chrome.
1967 - 1968 Bumper, Rear, Original GM Re-chromed
1967 - 1968 Bumper, Rear, Original GM Re-chromed
Our Price: $400.00

This is an original GM rear bumper that has been re-chromed. Exact fit for all 67 - 68 models. Just came from a parts collection that the guy had since the early 80s. The back side has some flaking paint, little discoloration around a couple lower bolt holes. Top side looks nice! Real vintage bumper thats been in storage for over 30 years. Add this GM piece to your collection today.

PART NUMBER: BUM-9G

Installation Note: Please do not over tighten. If you crank down too tight it will damage the chrome.
1967 - 1969 Bumper Bolt, Small Head, Polished Stainless Steel with Chrome Cap, Correct OE Style, Each
Our Price: $2.95

New correct size small head bumper bolt for your 67-69 Camaro.  Exact stainless steel capped bolt.  Works great for front or rear bumpers.  For 68-69 front corner mount you will need the longer version...check out our part number BUM-72.  

PART NUMBER - BUM-77
1967 - 1969 Bumper Bracket Bolts Set, Rear, 8 Pieces
Our Price: $9.95

Rear Bumper Bracket Bolts for 67 - 69 Camaro.

PART NUMBER: BUM-688
1967-1969 Rear Bumper Center Bracket Mounting Rivets - Pair
1967 - 1969 Bumper Bracket Rivets, Rear Center, Mounting, Pair
Our Price: $12.95

New correct pair of rivets to mount your center bumper bracket to the rear bumper.  OE style shape and size.  These handy little rivets allow your to mount the center bumper bracket like GM did.  Super easy to install, just give em a hammer tap.  Exact for all 1967 - 1969 Camaro models.

PART NUMBER: BUM-621
1967 - 1969 Bumper Guard Insert, Front, Rubber, Deluxe
1967 - 1969 Bumper Guard Insert, Front, Rubber, Deluxe
Our Price: $12.95

New front bumper guard rubber insert for your Camaro. Exact fit for all 67 - 69 deluxe style front bumper guards. Quality molded rubber guard insert with steel spine and threaded studs as original. Replaces original GM part number 3893800 perfectly. Includes mounting nuts and small washers for a quick install. Two required per car, sold as each.

Part Number: BUM-29
1967 - 1969 Bumper Guards Mounting Bolts Set, Front, Deluxe
Our Price: $7.95

New hardware set to mount the front bumper guards on your 67-69 Camaro models.

PART NUMBER: BUM-102
1967 Bumper Bolts Set, Larger Head, Polished Stainless Steel, Includes Nuts and Lock Washers
Our Price: $12.95

Polished stainless capped bumper bolts larger head than original all nuts included. Enough hardware for front and rear bumpers. Fits 67 Camaro.

PART NUMBER: BUM-68
1967 Bumper Bracket, Front Outer Corner, LH
Our Price: $19.95

New correct design left hand, drivers side bumper bracket for 67 Camaro.  This is the corner bracket that mounts at your fender extension.  Exact fit for all 67 models.

PART NUMBER: BUM-41
1967 Bumper Bracket, Front Outer Corner, RH
Our Price: $19.95

New correct design right hand, passengers side bumper bracket for 67 Camaro.  This is the corner bracket that mounts at your fender extension.  Exact fit for all 67 models.

PART NUMBER: BUM-42
1967 Bumper Brackets Set, Front, 4 Pieces
Our Price: $79.95

All four brackets. Fits 67 Camaro.

PART NUMBER: BUM-33
1967 or 1970 Bumper Bolts Set, Small Head, Correct OE Style, Includes Nuts
Our Price: $26.95

Pre-packaged chrome small head bolt and nut kits mount both front and rear bumpers. Technically correct. Correct small head, high polish heavy chrome plated bumper bolts. Correct captured washer nuts. 10 bolts/screws and 10 nuts. Enough hardware for front and rear bumpers.
*Works great for  
*all 67 Camaro models and
*all 70 Camaro models

Part Number: BUM-70
1968 - 1969 Bumper Bolts Set, Polished Stainless Steel, Includes Nuts and Lock Washers
Our Price: $12.95

Polished stainless cap for 68 - 69 Camaro. Enough hardware for front and rear bumpers.

PART NUMBER: BUM-69
1968 - 1969 Bumper Bolts Set, Small Head, Stainless Steel Correct OE Style: 8 Short Bolts, 2 Long Bolts, 10 Washer Nuts
Our Price: $29.95

Pre-packaged small head bolt and nut kits mount both front and rear bumpers for 68 - 69 Camaro.  Technically correct shape and size stainless steel.  Correct small head, high polish heavy polished bumper bolts. 8 short bolts, 2 long bolts, 10 correct captured washer nuts.  Long bolts are for the front corner brackets with the bushings. Enough hardware for front and rear bumpers.

Part Number: BUM-71

Fits both 68-69 Camaros